Don’t say you own a truck and you don’t feel like running to mechanics, spending tons of money in repair shops for every little inconvenience.
I mean we all have our internal “we can do it man-pride” to polish right?
Which is why at times like this, a floor jack can be your best friend to turn the garage into a perfect personal workshop.
Or, maybe you are a professional in search of the best floor jack for trucks to efficiently improve your trade.
Whichever is the reason that brought you here today, just sit back and relax!
To support you in the quest for finding the ultimate gear, here I will review the finest floor jacks out there.Invalid table id.
Best Floor Jack for Trucks Review
Trucks could easily weigh over 1000 pounds. Therefore when thinking of buying floor jacks, points like strength, stability, and safety should be given the maximum consideration.
Keeping this in mind, I will begin the review with:
1. Torin Big Red Hydraulic Trolley Floor Jac: SUV / Extended Height, 3 Ton Capacity
The Torin Big Red would be the perfect trolley floor jack investment for people looking forward to maneuvering their vehicles frequently.
Great at lifting small cars, trucks, SUV’s, the gear uses the science of hydraulic pressure instead of the traditional screw and lifts. This also makes it a more accessible tool to help lift-up and lower down vehicles at a much easier and more comfortable pace when compared with a scissor jack.
This thing boasts a weight lift capacity of around 3 tons (6000 pounds), and a 5-7/8 inch to 17-1/4 inch of lift height. Both aspects make it an ideal floor jack for heavy-duty safe elevating functions.
It comes with a long neck equipped at the end with an ergonomic rubber grip handle for a firm hold control. This feature, along with lifting off weight with smooth ease, also helps to reduce the time taken to jack up vehicles, thereby time-facilitating the maintenance regime.
The extended long neck is detachable as well. So, when not in use, it could quickly be taken down and stored in the designated storage slot at the side of the jack. Ready to be used whenever required.
Moreover, the integrated over the loop protection belt (to which the neck is attached) further halts you from lifting weights above the gear’s capacity, thereby preventing causes of accidental damage to the jack and thus ensures its longevity.
As for the flexibility part, the device is fitted with four casters or wheels. The front two casters are size-wise bigger and are fixed in position for steady support while the rear casters are smaller in size with 360° rotating mechanism that makes the overall floor jack very easy to exercise mobility wise.
- Great for heavy-duty lifts (trucks, SUVs)
- Hydraulic pressure technology
- 3-ton weight lift capacity
- Extended long neck
- 360° rotating wheels
- Heavyweight (43.9 pounds)
- Might be prone to leakage like all hydraulic equipment
2. Arcan ALJ3T 3-Ton Quick Rise Aluminum Floor Jack
If you are searching for a floor jack that is reliably sturdy on the structure, has high weight capacity, is easier to maneuver load and operation wise, and above all exceedingly safe to use, then look no further than the Arcan ALTJ3T.
Made of the aluminum grade that is used to build aircraft, the gear is a powerhouse when it comes to lifting 3 tons of weight safely.
Having a lift height range of 3¾ inches to 18¼ inches, the gear is the perfect tool to work on vehicles such as vans, trucks, SUVs, cars, etc.
When it comes to positioning floor jacks under vehicles, the flexibility aspect of the device matters the most. So in this area, the ALTJ3T passes with flying colors!
The lightweight aluminum body is paired with two ball bearing raised-casters at the back and two wide casters at the front.
This creates a perfect balance between smooth movement and stability. Both feature that ensures a steady platform necessary for repairing jobs.
The gear further uses dual pistons with protective rubber padding for grip control. Making it much easier to pump and lift vehicles by reducing the time taken and the strength applied.
In terms of sturdiness, the device is reinforced with lift arms and thick plates on the side. Thereby resulting in a structure that is not only durable but also extra strong with improved chassis torsion control.
Also, to protect the device from unintentional damages, it is equipped with bypass and overloaded valves. These features prevent you from overexerting the hydraulic pump by lifting weights beyond its capacity, thereby eluding damage to the device.
- Lightweight aluminum body
- Quick rise double pump piston
- Equips bypass and overload valves
- Reinforced arm lifts
- Protective saddle padding
- Side mount handle for easy carrying
- Conforms to ASME Pase (2014) safety standards
- A bit expensive
- 56 pounds may overwhelm some
3. Powerbuilt 620422E Heavy Duty 4000 lb Triple Lift Jack
Third, on the list is the Powerbuilt 620422E Jack, which is often regarded as the best floor jack for a pickup truck. Being a 2 ton (4000 pounds) hydraulic device, it has the potential to raise cars, ATVs, trucks, and motorbikes to a maximum height of 18-5/8 inches with 8-5/8 inches being the lowest elevation point.
Limiting itself not only to lifting and stabilizing vehicles but also to do works like changing transmissions as well as differentials, this specific device doesn’t require the assistance of jack stands at all!
Being sturdy and reliable in design, the hydraulic jack comes armored with the patented “Triple Lift design.” This means that with this thing in hand, you will be able to adjust its lift rails to various flexible heights to meet and accommodate different automobile requirements.
The lift rails and the detachable saddle of the gear are further padded to ensure durability in the long run.
There is also a security lock system established on the rails that once a vehicle is lifted, could be utilized to lock and hold it in place. This, in turn, deletes the need of having to use separate accessories such as floor jacks to support the weight otherwise, thereby saving you both money and effort in handling the job efficiently.
In league with floor jack standards set up by the ANSI (American National Standards Institute), this guy is a heavy-duty device built to meet all your car repair needs.
- Durable and versatile
- Patented triple lift design
- Flexible height adjustment options
- Security lock bar ensures additional safety.
- Has a maximum elevation height of 18-5/8 inches
- Like all hydraulics, may be susceptible to leakage
- Requires attentive maintenance to prolong usage period
4. Pittsburgh Automotive 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Rapid Pump Quick Lift
To put simply, the Pittsburg automotive is a low profile steel floor jack for people who are on a budget or do not want to spend a lot of money on such devices.
Capable of lifting weight around 3 tons (6000 pounds) in measurement, the device uses the old-style pump in action technique to lift vehicles. This also makes it a reliable model to be used by amateurs with relative ease.
Despite its inexpensive price tag, the Pittsburg is wholly constructed of precision welded steel that is not only tough and durable but also boasts an industry-grade finish.
Displaying a lift height of 2 to 19¼ inches, this car jack can lift cars nearly 2 feet above the ground! Also incorporated with the technology of the double piston Rapid Pump, it has the reputation of lifting up most loads within just 3-1/2 pumps of the device.
Furthermore, the device is designed with a universal joint release. This enables a user to gain strict control over the workload no matter which way the handle is positioned. The handle is also covered partially with a foam bumper to shield and protect the surface from work-related wear and tears.
As for stability, the floor jack has come up with extra-wide casters or wheels also made of steel to ensure hassle-free smooth maneuverability.
ASME/PASE standard certified, the Pittsburg is ideal for working on all types of vehicles with a particular affinity towards SUVs and sports cars.
- Exclusive Rapid Pump® dual pump system
- Universal joint release
- Durable steel body construction
- Compatible with all types of vehicles
- Hassle-free easy to use functionality
- Heavyweight (79 pounds)
- More suitable for personal rather than professional use
5. Blackhawk B6350 Black/Red Fast Lift Service Jack – 3.5 Ton Capacity
Manufactured by a company that’s been specializing in mass-market production of professional lifting pieces of machinery for more than 40 years comes the Blackhawk B6350.
Hence, given the company credentials when the equipment comes forth with a weight lift capacity of 3.5 tons (7000 pounds), you can bet that the service jack means business.
Having one of the highest weight lift capacities we have seen so far in the list, the Blackhawk B6350 indeed will be able to lift all manners of vehicles, only maybe falling short to giants like mega trucks.
Constructed of a heavy-duty steel body structure, the device yells sturdiness as its dominant feature with promises is of long term safe usage valuation.
Then again incorporated in the device is the unique technology of fast lift! This makes it capable of lifting load between an impressive range of 5 and 22 inches by pumping the handle only three to four times.
The built-in bypass, vent plug, and other security valves also make the device safe to use as it prevents you from loading weight above its lifting capabilities. It is thereby avoiding causing damage to the hydraulic ram due to over-pumping all together.
However, the most attractive feature of the device lies in its swivel saddle.
The detachable saddle is padded with rubber to protect the surface area from damages. Adept in rotating a full 360° in both clockwise and anti-clockwise direction, this thing is the most manageable floor jack when it comes to maneuverability and positioning.
Appropriate to be used in both home and workshop settings regularly, the only bummer to the device is its inability to support the load after lifting it. So, you will have to use separate support jacks to hold and stabilize the weight in place.
- Steel frame sturdy built
- 5-22 inches lift range
- 360° padded swivel saddle
- Easy lift standard trolley design
- Two-piece detachable handle
- ASME & ANSI Standard approved
- Heavyweight (85 pounds)
6. Arcan XL20 2-Ton Heavy Duty Low Profile Steel Service Jack
When it comes to low profile floor jacks, The Arcan XL20 is undoubtedly one of the most popular ones among its class to both DIY enthusiasts and professionals alike.
And why not?! The sleek, easy to control, industry-grade steel frame structure is not only sturdy and stable but also looks appealing to the eyes with its glossy stain or chip-resistant all over black paint.
Compact in design the device features a maximum lift range of 18½ inches with 3½ inches being the lowest elevation point. This low profile series makes it ideal to be used under most of the vehicles you could probably think of playing a hand at.
With 2 ton (4000 pounds) weight capacity, the gear further display features such as rapid lift dual pumps, universal joint release, and security valves. The last feature inserted to prevent overloading issues that may otherwise cause damages to the device.
In terms of convenience, the 2 piece handle of the product is protected with a foam cover. This makes it easier on the user to grip and pump the hydraulic ram faster with a comfortable pace.
The casters on the trolley jack are also made of steel which adapts the entire device to an excellent steady platform that could be used reliably for a long time without fear of breakage under pressure.
Though not much of significance and yet worth a mention is the protective rubber pad found over the lift arms. Along with preventing wear and tear damages caused through friction of weight lifted objects, this feature also helps to maintain the aesthetics of the device for years to come.
- Excellent low profile jack
- Compact, high-quality steel frame
- Universal joint release
- Easy lift double pump mechanism
- Certified under ASME PALD 2009 quality standards
- 67 pounds is a heavy device to maneuver
- Mere two-ton weight capacity may dishearten some
7. Craftsman 3 Ton Floor Jack, Jack Stands and Creeper Set by Craftsman
If there is one tool that every DIY enthusiast or professional mechanic should have lying around in his or her workshop, I will vote for the Craftsman 3 Ton floor jack.
For this is a 3-in-1 floor jack that brings along an assortment of compatible features with it such as the likes of 36 inches of creeper with headrest support, a floor jack, and 2 jack stands. See what I am talking about?
A complete package to assist in your repairing endeavors through and through. Now to break down the features individually, let’s begin with the weight lifting range.
Controlling the capacity to lift up to 3 tons (6000 pounds) of weight at a time, this one is the ideal device to work with, considering vehicles such as minivans, trucks, SUV trailers, and needless to say all sort of cars.
Furthermore, it has a maximum lifting range of 19¼ inches with the lowest point being 5½ inches, so you can pretty much work on any type of vehicle using it. Provided that the car doesn’t have an extra-low carriage profile.
Next, come the features of the creeper and the two jack stands. We all know how much of a hassle and risk it is to get under a vehicle — just thinking about the ton of weight that’s being lifted to make the space work should be enough to concern anyone to invest in a mechanism that is secure to its core.
So, in this aspect, the Craftsman with its double stand jack, provides a well-balanced safe environment to its user both psychologically and physically. With the two stands in place, there is no need to worry about the stability of the lifted weight.
Alongside, the 36-inch long creeper with its smooth-rolling wheels and inbuilt headrest also supplies the comfortable mobility freedom required for the job.
All in all, the Craftsman accomplishes to deliver a safe environment besides quality tools, and this makes it an ideal floor jack to have around homes and workshops.
- 3-in-1 versatile tool
- Dual jack stands
- Extremely secure and safe
- Smooth-rolling 36 inch creeper with headrest
- The sturdy built frame is easy to use, assemble, and store
- The only little inconvenience might be the 73 pounds weight
Before You Buy, What to Look For
If you are a professional person, I assume that you already know exactly what to look for when thinking of buying a floor jack.
However, if you are a newly recruited DIY enthusiast who likes to know and learn how it is best to repair one’s car manually, then this is the segment for you.
So, some of the essential features of floor jacks that you need to compare and study before making the final choice of purchasing a floor jack are given below.
In terms of floor jacks, it is always advisable to buy one with a solid metal build. Heavy-duty rust-proof metal frames example steel, aluminum are favored, especially as they provide a secure and stable platform necessary to do the work.
Of course, the primary purpose of buying a floor jack is to lift-up and hold vehicles at secured height to make way for repair works. Therefore, the weight capacity of the device should be a priority concern.
It is wise to go for jacks with a weight capacity higher than that of your car’s mass, as it will secure stability and peace of mind rather than the other way around.
The technology that is being used to pump and lift the weight can heavily influence your time management and body force requirements.
In this aspect, the hydraulic mechanism that uses a dual pump system could take the exertion pressure off you and make the task easier compared to traditional single pump jacks.
Arm Lift Height
Remember that the jack is going to be positioned under the car; hence, the height of the lifting arm should never exceed the undercarriage height.
As a precautionary measure, it is wise to leave an inch of a gap between the vehicle chassis and the lifting pad of the jack.
To achieve flexibility, freedom, and positioning convenience, check on the wheels of the device to make sure they are sturdy, smooth-surfaced, and free of glitches.
Frequently Asked Questions
For helping you make the best buying choices, given below are the most common FAQs:
Q: What is the basic function of a floor jack?
Ans: The basic function of a floor jack is to go under your car and lift the device partially or fully off a few inches or feet so that you can do tasks like changing tires or other repair works conveniently.
Q: Is there any specific sweet spot where attaching jacks works best?
Ans: No. Different vehicles have different lift spots designated to them. Consult the car manual beforehand to recognize the patterns.
Never randomly through in the jack and start lifting as it can cause severe damage to the car.
Q: Cheaper or Expensive- which to buy?
Ans: Like with all mechanical instruments, there is always the case of “you get what you pay for.” But that being said, money doesn’t always guarantee quality.
So, look for the specifications that you require and try to find a balance between the price and the features offered.
Q: Do floor jacks require maintenance?
Ans: Not really. Although regular checks for hydraulic leaks, bolts and nut placements, and safe, dry storage will only help to prolong its durability.
Q: Is it safe to use floor jacks by total beginners?
Ans: With appropriate measures in place and attentive study of the device manual, it should be safe to use with practice and time.
Whether simple tire changes or elaborates under the carriage repair projects, the importance of using the right floor jack should never be underestimated.
Hence, if you are looking to purchase the best floor jack for trucks, make your specifications a priority! As it will save you from wasting money on irrelevant finds and time, respectively.
Nevertheless, let us know in the comments how much you liked our floor jack for truck reviews.
Hi, it’s Bucky Balls
CSE (Computer Science & Engineering) & MSC from Port City International University.
Working infield of WordPress, eCommerce Develop, SEO, Digital Marketing, Google AdSense an Affiliate Marketing Since 2010.
Google AdWords/Google Ads Display.