You have no control over the dust or mud while driving. They will eventually stick to your car and your job is to clean it to keep shiny. To withstand against them with a bucket, a garden hose, and even a rug, weekly car cleaning turns into a messy and time-consuming battle unless you have the best car wash foam gun.
They can spread the soap water at a wide-angle to cover the whole surface with white foam. No matter what the far corner behind the tire or the windshield, the velocity of the water will help to reach every corner of your car. They are easy to use, effective, and super cool.Invalid table id.
What is a Foam Gun?
A foam gun is a tool that is featured to produce foam by mixing water, soap, and air and spread a thick layer of foam on the car surface to enable you to wash it without leaving any scratches. It is designed to attach with your standard garden hose adaptor connected with the tank.
This is preferred by the people who have no access to electric pressure washers
. The foam lubricates the car surface thus rinsing the car does not damage the car paint by leaving scratches.
Our Top Picks of Best Car Wash Foam Guns
Here we have gathered up some best car wash foam guns available based on our research. This will hopefully narrow down your search list and assist you with the true reviews. Let’s go ahead.
1. Chemical Guys ACC_326 – Torq Foam Blaster 6 Foam Wash Gun
First, we have Chemical Guys ACC_326 Foam Wash Gun on our list. You can connect this easily to a standard hose without any sophisticated equipment.
The main benefit of this foam gun is, the dilution ratio of the soap and water is adaptable using the dial. So, you can produce the soapy foam according to how dirty the car is by simply turning the dial without wasting water and soap.
This foam gun is featured to generate slick foam to get rid of the abrasive dirt and debris without grinding them on the painted surface. Use this foam gun with two bucket methods and it will not leave any swirls and scratches on your car.
The canister is worth mentioning. You can hold 32 ounces of soap solution in the bottle and extend your car cleaning. Just a decent amount of plain water and 1-3 ounces of car wash soap, and you can start bubble bathing your car.
I liked the rugged nozzle that is constructed of quality aluminum and brass. The nozzle is specially designed to prevent water flow when you are not using the foam gun. Just lightly squeeze the handle and get a steady flow out of the nozzle.
Also, the foam gun weighs 1.35 pounds for convenient use. All the moving parts are made sturdy and corrosion-resistant.
- The reservoir doesn’t tighten up all the way and spills water.
- Leaves soap and water spots.
2. Foam King – The King of Suds – Deluxe Car Wash Sprayer – Car Foam Gun
The Foam King Car Foam Gun is equipped to connect to your garden hose without any extra hose attachments. It is featured with a low-pressure washer kit. So, you can turn your garden hose to an instant foaming pressure washer.
This foam gun piqued my attention with its nozzle. The nozzle is specially designed with a perfect fit rubber seal. Thus, it prevents annoying leaks effectively while cleaning your car.
The connectors are designed to assist you quickly release or connect without wasting your precious time. So, you can connect or disconnect the garden hose as you require in no time with just one click.
You don’t have to mix the water and cleanser by guessing and creating a blender. There are bottle fill lines to instruct you how much water and cleanser you have to add. So, you can produce an ample amount of suds and detail your car.
The body of the foam gun is manufactured to be of only 1.45 pounds. This lightweight makes your task quite easier. Also, high-quality brass fittings will last long.
- The foam drips out of the nozzle with very low pressure.
3. MATCC Car Foam Gun
The MATCC Car Foam Gun is featured with high-quality brass connectors. This will assure you a leak-free connection with enough tightness to the hose. Also, it is equipped with a rubber-sealed loop inside the ratio dial to seal the connection.
The best thing is the double filter system to avoid scratches. The first one is the metal mesh filter situated on the end of the gun to filter particles in water. Another one is located at the end of the pick-up tube to filter out particles in soap.
Another thing is, you can connect it with all standard garden hoses with the 1/4inch brass hose connector and the installation is not that complicated. The brass stainless steel makes it durable. The quick attach and release mechanism at the end of the trigger allows you to connect it instantly.
The weight of the MATCC foam gun is 1.7 pounds. The water pressure is about 2.5-6bar. It is capable of storing 900ml of soapy water. It demands 2 GPM over 1PSI to operate with maximum potential.
Also, it is featured with a water regulator and a spray nozzle with an adjustable dial with 5 levels that allows you to adjust the flow and dilution ratio. You don’t need any pressure washer here.
- The back handle is not as durable as made of plastic.
- There is no way of air intake and so the foam is little flimsy.
4. Adam’s Standard Foam Gun
Next, we have Adam’s Standard Foam Gun on our list. This foam gun is designed to give you an incredible amount of thick car wash soap foam while washing your car. Also, this generates suds with increased lubricity so you can get rid of scratches.
If we talk about the construction, the body is built with polythene plastic which resists chemical, cracking, and fading. Also, the filling mouth opening is very large so you can refill it without any effort.
The thing I liked most is the hose nozzle which is quickly connectable. This enables you to clean wheels, tires and you don’t have to deluge them into the cleanser. So, you can clean the headlights, trim, glasses and all other parts of your car.
The canister of Adam’s standard foam gun is 32 ounces. Thus, it will provide you a broad cleaning capacity. You just need water and 4-5ounces of car shampoo and you are ready to go. Here, no pressure washer is required while washing.
Another mentionable fact is, this foam gun is featured with three different metering tips. So, you will have full control over how much soap will flow through the nozzle. Also, the weight of this foam gun is 1.9 pounds only. So, it will not exhaust you while cleaning and offer you extended cleaning.
- This foam gun often leaks water.
5. AOOU Foam Blaster Wash Gun Car Foam Gun
AOOU Foam Blaster Car Foam Gun is constructed with material like brass, plastic, and rubber. The joint of the pipe is made of premium brass that ensures enough tightness. The ABS plastic parts offer impressive durability.
Also, to prevent leakage in the joint with the hose, there is a perfect fit rubber seal. It perfectly fits with any standard garden hose. All you need is a tap and a garden hose and you are ready to go.
The internal parts allow better mixing of water and air with the soap or shampoo. There are filling lines to guide you with how much water and soap you have to fill. Also, the capacity of the canister is 900 ml which is enough.
One thing that hooked my attention is the adjustment dial. You can increase the concentration of foam by increasing the numbers at 5 levels.
This foam gun is very versatile. You can use it to water plants, wash cars, cycles, bikes, swimming pools, glass walls and so one.
The AOOU foam bluster weighs around 1.25 pounds. So, this small size and lightweight makes it portable to anywhere and easily storable.
- The nozzle is a little defective.
- Leaks between sprayer and reservoir connection.
6. Torq EQP323 Snow Foam Blaster R1 Foam Gun
Next on our list, we have Torq EQP323 Foam Gun. This foam gun is specially designed for the dedicated car detailers and is a perfect fit for any standard hose in your garden.
It is designed to give out an ample amount of thick foam on your car surface. This is done by mixing up the soap, water, and air in the required amount inside the foam gun. So, give your car a bubble bath every week and get back the shine each time.
The next thing I would like to bring up is the in-line filter mesh screen. If you don’t be cautious any abrasive particle can be thrown on your precious car surface with high pressure thus damaging the car paint. This filter captures these threads from water pipes and hose.
Another good thing is the high capacity canister and the instant connected nozzle. The container has a capacity of 32 ounces. The three interchangeable tips are pretty interesting. Use any of those water pressure tips to get the perfect foam thickness according to your requirement.
If we talk about the construction, the body is built of chemical resistant plastic. This removes fading and cracking from exposure. The weight of the product is 1.72 pounds.
- Material quality feels a little cheap.
- The connector is poorly made and does not seal right.
7. SwiftJet Car Wash Foam Gun Sprayer with Thick Suds
Finally, SwiftJet Car Wash Foam Gun completes our picklist. It allows the professional car cleaners to wash the dirt off the car and grime gently avoiding any scratches on the chrome or paint surface.
The connector is made of brass. Also, the rubber seal serves to prevent annoying leakage and wasting of solution.
It attaches to your garden hose or faucets in no time and makes car cleaning a fun time for you. The attaching process does not require any rocket science or equipment.
This contains a double filter system to filter out harmful particles. So, get proper lubrication and clean your car without leaving any scratches. The water flows out of the nozzle with pressure about 2-6bars for advanced cleaning.
The thing that drew my attention is the 6 adjustable foam ratio levels. When you are going to wash your car after a long trip, you need thicker foam. The air is mixed with the solution with different amounts at different levels.
- While washing the spout blows off frequently and hits the car.
- Connecting and releasing the hose often jams.
Qualities of The Best Car Wash Foam Gun
To extract the maximum in your budget, there are some certain facts you have to take into consideration. We have discussed below some qualities to look for in a foam gun that will make you feel like a winner after the purchase.
The body of a foam gun should always be made of chemical-resistant and anti-corrosion material like plastic as you are going to use some chemical soaps inside to produce foam. Else it will fade and crack after some time and create a blander.
The nozzle is the part that withstands high-pressure water. So, it should be made of brass, aluminum, or other strong material. Brass fittings corrode less and provide a tight seal. Also, you should avoid plastic handles or it will not last long.
It will be tiresome if you have to refill the soap bottle again and again. As you are not cleaning a toy, it is a car that you are cleaning, the canister of the foam gun that you are using should have high capacity. Most of the foam guns have soap bottles of about 30 ounces capacity.
Some foam guns are featured with different knobs or dials or multiple metering tips to control the dilution ratio or flow of foam. They normally offer 3-6 levels of concentration for the foam.
So, this gives you control on the flow and you can tune the tool according to how much thickness you require. These dials effectively prevent the wastage of soap and water.
It often happens that if there remain any dust particles in the foam, as the foam is thrown out of the nozzle at a very high speed, it can end up scratching your car. So, some foam guns offer single or multiple filters to suck in these dust particles.
If you are determined to purchase a foam gun, you are planning to use it attached with your standard garden hose for water supply to clean your car. So, the connector that will attach the foam gun with the hose should perfectly fit.
Foam guns give out thick suds at very high pressure. So, you have to take a look at the water flow pressure that will not harm your car paint or will not be too much for your foam gun nozzle to withstand. Most of the foam guns have water pressure of 2-6 bars.
Leaking water is a common problem faced by people while washing the car with a foam gun. They leak the soapy water while washing at hose connectors or pipe joints and wastes much soap water. Some foam guns offer extra measures like rubber seals to prevent leakage at the joints.
To easily walk around the car while cleaning and also storing the foam gun while not in use, you need something light in weight and compact. Foam guns normally weigh 1.25-1.9 pounds.
Q: What is the difference between a foam gun and a foam cannon?
Ans: The main difference lies in the water delivery process to the container. A garden hose is used in a foam gun and a high-pressure hose is used in a foam cannon creating thicker foam.
Q: Is it good to let the foam dry on the car?
Ans: No, it can damage the car paint.
Q: How many types of foam guns are there?
Ans: There are two types: adjustable and non-adjustable.
Q: How to use a foam gun while car washing?
Ans: Put soap and water in the bottle, connect it with the garden hose, spray the foam on the car, rinse it with a sponge, flush off and dry the car.
A foam gun not only saves your precious time but also makes car cleaning enjoyable to you. In this article we tried to guide you so far with relevant information, buying a guide of a foam gun and accumulated some of the best car wash foam guns with their different aspects.
I personally suggest Chemical Guys ACC_326 Foam gun where you can control the dilution ratio. MATCC Car Foam Gun is good for its double filter system and the adjustable dial. Last but not least Adam’s Standard Foam Gun is unique for the three metering tips.
Hi, it’s Bucky Balls
CSE (Computer Science & Engineering) & MSC from Port City International University.
Working infield of WordPress, eCommerce Develop, SEO, Digital Marketing, Google AdSense an Affiliate Marketing Since 2010.
Google AdWords/Google Ads Display.