Whether you are a car owner, a garage owner, or a car enthusiast, a floor jack is a must in everyone’s garage. Every car owner commonly uses traditional floor jacks. If you own a sports car or you are a car enthusiast, and you like to spice things up and certainly have a dropped car, you must need the best Low profile floor jack.
A traditional floor jack cannot slide under the car because of the shallow distance between the body and the ground of the vehicle. Then things get a little tricky. To lift remarkably lowered vehicles, whether they are modified or a sports car, you need to have a first-floor jack called the low profile floor jack.
Comparison Table of Low Profile Floor Jack
| Preview | Brand | Details |
|---|---|---|
  | Arcan XL20 | |
  | Pittsburgh | |
  | Arcan ALJ3T | |
  | Pro-Lift F-767 | |
  | Sunex (6602LP) | |
  | Liftmaster | |
  | 1.5 Ton Compact | |
  | Powerbuilt 620479E | |
  | Neiko Pro 20272B | |
  | Blackhawk B6350 |
Almost every garage owner owns one, and if you are one of those people who have to deal with sports cars daily, then having a low-profile floor jack is a must.
So without any further ado, let’s have a look at the best low profile floor jacks you find in the market today. Meanwhile, check out more on our next product review on the best wheel bearings that you may find helpful in finding the best for your car.
Top 10 Best Low Profile Floor Jack Review 2021
01: Arcan XL20 Black Service Jack
Highlighted Features
- Compact Design
- Dual Pump for Quick Lifting
- Universal Joint Release for Precise Control
- Safety Valve
- Constructed from High-Quality Steel
This Arcan XL20 is one of the best affordable low profile jack built with high-quality steel, which is much durable and stronger than aluminum. It 20 weighs around 67 pounds and can lift 2 tons of weight.
It’s minimum lifting height is 3.5 inches and has a maximum higher lifting capacity of about 18.1 inches.
Talking about the dimensions of the jack itself, it is 24 inches in length and 13 inches wide, which is quite okay for a low-profile jack.
“Some people have reported the leakage of the cylinder after using it for a while. Which is bad, but it could be possible that those people didn’t use the jack correctly or didn’t take proper care of it.”
This jack itself comes with heavy-duty wheels that don’t just fall off and get damaged after rough use.
The handle length of the jack is 45.3 inches, which is quite reasonable and makes the lifting process quite more comfortable due to the application of less force.
As far as the pricing is concerned, it is an excellent choice for people who are looking for a low profile floor jack to use at home or in their home garage.
Pros
- Affordable Price
- Steel Built
- Heavy Duty Wheels
- Dual Pump
Cons
- People have reported oil leaks
02: Pittsburgh Automotive 3 Ton Heavy Duty Ultra Low Profile Steel
Highlighted Features
- Super Tough Precision Welded Construction
- Industrial Quality
- Rapid Pump Technology
- Universal Joint Release
- Extra Wide Casters
The Pittsburgh Automotive low profile jack is an excellent choice for car garages and home garages where you need to lift cars almost every day.
It is a sturdy built jack that can go through wear and tear and rough environments easily.
It can lift a maximum of 3 tons, as said in the name. The minimum height for this low profile jack is 3-1/8 inches and a maximum lift height of about 19-5/8 inches, which is perfect for a jack of such sort.
“The jack is prone to leakage of the seal if left unused for a long period.”
Talking about the dimensions of the jack itself, it is 27.5 inches in length and approximately 14.5 inches in width. The weight of this jack is around 78 lbs.
However, moving it is not difficult due to its extremely wide high-quality casters. Talking about handle length, it is 45 inches, which is excellent for a jack of such sort.
It is a good option for people looking forward to using it in their garage and using it for daily tasks.
Pros
- Good Price
- Wide Castors
- Easy to Assemble
Cons
- Oil leakage if not handled properly
03: Arcan ALJ3T Aluminum Floor Jack
Highlighted Features
- Aircraft Grade Aluminum
- Reinforced Arms
- Dual Pump Pistons
- Vehicle Protection
The third low profile jack on our list is very demandable. We recommend people to use this jack who have to use it in their workshops. The maximum lifting capacity is 3 tons, which is excellent for any lowered car in the market today. This jack can lift as it is lightweight and is easy to move due to the high-quality wheels it has.
It has a dual pump piston structure and some strong lift arms for easy carrying around. Its lifting handle is divided into two pieces so you can make it short or long based on the circumstance.
“It is made up of aluminum, which is lighter than steel but cannot reach the strength level of steel.”
We are talking about the dimensions of this jack, and it weighs around 56 lbs. This jack has a minimum lift height of about 3-5/8 inches and a max lift height of approximately 19-3/8 inches.
Anyhow an excellent choice for people who want to use it in their garage.
A feature that most of the low profile jack lacks is vehicle protection, which helps in saving vehicle paint from scratches and lines.
Pros
- Light Weight
- Vehicle Protection
- Heavy Duty Wheels
- Meets ASME Safety Standards
Cons
- Made of Aluminum
04: Pro-Lift F-767 Grey Low Profile Floor Jack
Highlighted Features
- Extra Low Profile
- Safety Valve for Overload Protection
- Built from Steel
- Protection against over-pumping
The Pro-Lift F-767 low profile jack supports the maximum weight capacity of two-ton. It is steel made, which is quite robust and can handle rough usage without any problem.
The minimum lifting range of this jack is about 3.5 inches. However, the maximum lifting range is about 14 inches.
“Maximum weight capacity is 2 ton, so you need to confirm the weight of the car before lifting.”
The weight of this jack itself is about 31lbs. Considering its price, it is the best value for money low profile jack. This jack is best for home use or for people who have set up a home garage.
It is the best bang for the low buck profile for home use if you consider the price— best for the car enthusiast who likes to maintain their car themselves.
Pros
- Steel Built
- Best for Home Use
- Very Affordable
- Extremely Low Profile
Cons
- 2-ton lifting capacity
05: Sunex (6602LP)
Highlighted Features
- Rapid Rise Technology
- Quick Release Handle
- Low Clearance
- High Reaching
The Sunex Tools 2 Ton Low Profile Jack is a very high-quality jack providing the ability to lift the 2-ton weight without any trouble.
The Sunex Tools jack has a rapid rise technology with double pistons, which enables it to rise to 24 inches in just six pumps.
It features a quick-release handle that provides leverage and makes it convenient to store the jack anywhere. The best thing about this jack is its ability to lift from a minimum of 2.75 inches, which makes it an ideal low profile jack — keeping in mind its new low profile.
“Some people have reported that the jack came faulty but was replaced. Also, people have reported after frequent use, it starts to leak oil.”
It can lift to 24 inches, which ultimately means that we can even lift SUVs and Jeeps with this jack. If we Talk about the dimensions of this jack, its length is 50 inches, and weight is around 103 pounds. Its handle length is 50 inches, which is ideal for a jack of such sort.
This is an excellent choice for workshop owners and home garage people who love to work on cars.
Pros
- Low Lift Height
- Can lift SUVs and Jeeps
- Bang for the buck
Cons
- A little heavier
06: Liftmaster
Highlighted Features
- Dual Parallel Pump System
- Constructed for professional race teams
- Two pieces knurled Steel handle
- Strengthened Rubber Pad for Better Protection and Grip
The Liftmaster is a high low profile jack that can handle a total of 3-ton weight.
It is not what it looks like it has a lot to offer. It has a traditional pump system that makes the lifting process very easy.
Its saddle is with protective rubber coating, which makes it almost antislip when it comes to lifting low profile cars.
Talking about the minimum and maximum lifting range, The Liftmaster offers a minimum lift range of about 3 inches and a maximum lift range of about 19.7 inches.
“People had reported that the instruction manual was not clear, and the handle required some oil before use, which was unmentioned in the user manual.”
The body itself is high-quality steel made, which is tough and rugged. As far as the product dimensions are concerned, its length is 31 inches, width is 15 inches, and the height is 6.5 inches.
All in all, it is an excellent jack for home use or home garage; it is not suitable for use in workshops. However, it gets the job done quite well.
Pros
- Lifts 3 Ton
- Steel Built
- Affordable
- Simple Looks
Cons
- Unclear Instructions
07: 1.5 Ton Compact
Highlighted Features
- Dual Parallel Pump System
- Lift lowered vehicles to appropriate height in just 3-4 pumps
- Two pieces knurled aluminum handle
- Aircraft-grade aluminum
Rapid Pump, 1.5 Ton Jack, is built of aircraft-grade aluminum that provides excellent stability while working.
Due to its aluminum body, it weighs considerably less and is only 30 pounds. Its rapid pump technology is famous for its quick pumping.
You can lift a car to a normal working position in just 3 – 3.5 pumps, which are excellent for a low-profile jack of this category.
Rapid Pump, 1.5 Ton Jack is comparatively cheap and gets the job done quite well. However, we will not recommend using it in workshops or places where it will be handled roughly.
“Its lift capacity is 1.5 ton, which less, so you need to be cautious while lifting heavy cars.”
Another great feature about this low-profile jack is that it has a foam bumper, which prevents the car from getting scratched up if it touches the body accidentally.
Talking about the minimum lift height of this jack, it is 3-1/4 inches. On the other hand, the maximum lift height is about 14-3/4 inches overall. Its length is 23 inches, and the width is 10 inches, and the height is 7 inches.
Overall a high budget low profile jack for home and home garage use.
Pros
- Aluminum Built
- Affordable
- Simple look
- Quick Pump Technology
Cons
- Can lift 1.5 ton only
08: Powerbuilt 620479E
Highlighted Features
- Super Low Profile Design
- Versatile Lift Range
- Locking Safety Bar
- Ball Bearing Swivel Casters
- Meets ASME Standards
The Powerbuilt 620479E is a high heavy duty low profile jack; it can lift over 2 Ton load without any worries.
The best thing about this jack is its minimum lift range, which is only 2-3/4 inches, which is excellent, and the maximum lift capacity of this jack is about 15-1/4 inches.
The cool feature about this jack is that no jack stand you require due to its safety bar. Which can you can install under the lift after pumping the car up to the desired position.
Talking about the dimensions of this jack, it is 24.7 inches in length, 13.4 inches in width, and 7.75 inches in height, which is excellent considering its price.
“People have reported that after a few uses, the jack tends to leak oil, and the support isn’t cooperative, instead of replacing the jack they ask to replace the seal kit.”
An excellent choice for home garages and workshops. A good option for people looking to switch to a low profile floor jack.
Pros
- Very Low Minimum Lift Height
- Safety Bar
- Can lift 2-ton load
- Affordable
Cons
- Leaks Oil
09: Neiko Pro 20272B
Highlighted Features
- Aluminum Built
- Reinforced Lift Arm
- 3 Ton Capacity
- Dual Pump Design
The Neiko Pro Premium Low Profile Jack is aluminum built up, which is excellent for its size. It can lift to 3 tons of weight and can bear wear and tear without any trouble.
The jack features dual-pump design, which makes the lifting process more accessible and offers excellent stability while lifting due to its heavy-duty casters.
It comes with reinforced side handles, which makes it easier to carry, and it has quite less weight than steel low profile jacks.
It is easy to move around in the workshop as well. I would suggest using it in a workshop due to its substantial duty to build quality.
“Some people have reported that the casters get jammed after a while and don’t rotate. Which makes it difficult to move around.”
You can safely use it in a workshop. As far as the lift range is concerned, the minimum lift range of this jack is about 3.75 inches to 19.25 inches, which is excellent.
Overall a high low profile jack, highly recommend to professionals who want a new low profile jack in their workshops.
Pros
- High-Grade Aluminum
- Heavy Duty
- Can lift 3 Ton of Weight
Cons
- Casters get stuck after some time
10: Blackhawk B6350
Highlighted Features
- Bypass Protection which Prevents from Over Pumping
- Built-in safety valve
- Swivel Saddle
- Rear Caster
- Heavy Duty Steel Construction
The Blackhawk B6350 is a heavy-duty fast lift jack having quick lift technology, which makes the lifting process easier.
The Blackhawk B6350 is an excellent jack because of its capability to lift about 3.5 tons.
It is heavy-duty steel made up, which makes it a lot heavier than aluminum jacks. Still, on the other hand, it provides a great life and can bear wear and tear without any trouble.
As far as it’s minimum lift capacity is concerned, it is disappointing. But it can lift 3.5 tons of weight. It is okay. It has a minimum lift height of about 5-1/2 inches and a maximum lift height of about 22 inches.
“The only drawback of this jack is that its minimum lift height is 5-1/2 inches, which can be an issue for some cars but not for all. On the other hand, it can lift 3.5 tons, which is quite great.”
As it is steel made, it is quite heavy & weighs around 90 pounds, which is quite heavy for a jack.
It has high-quality, sturdy casters, which make the moving process quite easier. It can move on concrete-like nothing.
This is an excellent choice for workshop owners who need to lift heavy cars every day. It meets the ANSI / PALD 2009 Standards as well.
Pros
- Steel Built
- Heavy Duty
- Good Casters
- Can lift 3.5 Ton weight
Cons
- Minimum Lift height is quite less
Buying Considerations of Best Low Profile Floor Jack
After going through a bunch of low profile jacks, let’s talk about the things which you need to keep in mind before buying a low profile car jack. You are spending a massive sum of money, so, first of all, you need to list down the things which you expect from the low profile jack you want to buy. Later on, based on that list, you can choose the jack which suits you the best.
Lifting Arm
The lifting arm is part of every floor jack. It is the long bar that is press down to pump the car up. It is the arm that does the lifting. So you need to make sure that the arm itself is quite strong and well built. If the arm is not strong, the jack might not be a stable one.
It could vibrate while lifting in the air. So always make sure that the jack is quite robust, and it can handle the weight you are going to raise.
Also, as an addition, if you work in tighter spaces, choose the jack which has Lifting Arm in multiple pieces, some jacks come with two-piece lifting arms so you can shorten the length of the arm. However, that requires more strength while pumping.
Lifting Range
The lifting range is the range, which means that from what minimum height a jack can lift and to what maximum range the jack can reach. Some jacks provide a minimum of 2.5 inches of minimum lifting range.
So, first of all, make sure that if you are going to be dealing with dead dropped vehicles, you need to make sure that you get something that can lift that car. You don’t end up getting disappointed with this purchase.
Also, if you need a jack that can lift SUVs and Jeeps as well, then make sure to keep a looking at the maximum lift range. It is generally 14- 17 inches, which are quite significant.
Weight Capacity
The next thing you need to keep in mind is weight capacity. It is one of the most important factors while buying a jack. Because, at times, it can be dangerous if you don’t care about the weight capacity of the stud.
Cars have different weights. If the vehicle is heavily modified, perhaps has a 3rd party engine with other alterations, it will weigh far more than the factory weight.
Hence, always keep in mind the weight you are going to lift with the jack and then choose a jack based on the weight you are going to raise.
Saddle Pad
Saddle Point is in every jack; it is the point that makes contact with the car body to lift the car, and it is the point that carries all of the weight. Always make sure that the saddle pad has an anti-skid coating on top of it and make sure that it is durable.
Because most of the time, the anti-skid coating gets worn away, which exposes the bare metal, and it can be dangerous. So always look out for jacks with high-quality saddle pads.
One more precaution you should keep in your mind is that you always lift the car from proper lifting points and not from the body. Somebody points are weak and can’t handle the weight, which can result in damage and slipping of the vehicle, so always use proper jacking points for better stability.
Rear and Side Handles
Low Profile jacks or all jacks are quite heavy. This you can use for lifting huge amounts of weight. Talking about jacks made from steel are far heavier than the jacks made from aluminum.
This makes it difficult for the jack to move around. So always look for jacks that have enforced handles for easy moving around of the jack. We won’t recommend buying a low weight jack just because of its movement. Security is first going for a heavier jack is not an issue, if it has enforced handles on the back and the side.
Rollers and Casters
Rollers and casters are the wheels that are at the bottom of the jack. These low profile jacks are quite heavy; hence they require good quality rollers and casters for their movements.
Most of the companies lack in providing high-quality rollers and casters, so always look for jacks with high-quality rollers and casters. Some companies provide good quality rollers and casters, but their bearing gets jammed after a certain period. So always make sure to keep the jack maintained from its rollers and casters. Don’t let anything get stuck in them.
Build Quality
Always focus on the build quality; there are two primary materials from which low profile jacks come from. They are made from steel and aluminum both have their pros and cons.
As far as steel is concerned, it is considerably heavier than aluminum but is more sturdy and tough than aluminum.
If you are looking for a jack for using in-home or your home garage, we will recommend using an aluminum jack. However, if you have to use the jack in your workshop or garage.
Then we will always recommend using a steel low profile jack. It will be heavy, but it will stay the same for life. Steel can bear more wear and tear and can handle tough situations without any trouble.
Warranty
Warranty is another crucial aspect, always make sure to get a jack that comes with warranty. Jacks you can use in rough and tough conditions and for handling a lot of weight.
Hence, always go for a jack that comes with the maximum warranty. The most common flaw most of the low profile jacks come with is the oil leakage issue. Most of the jacks start to leak oil after a certain period.
Although this is a simple fix to change the seal kit, no one wants to expect leakages from a new jack. Keeping in mind if there is no warranty for the jack you get. It will be a pain in the ass to get it fixed by the company, as customer support is terrible most of the time.
Cost
Pricing is another main factor that you need to consider before buying a low profile car jack. If you have to use a low profile jack in your home just for your car, then it doesn’t make any sense to purchase a heavy-duty jack and spend loads of money on it. Instead, you can get a cheaper jack and make use of it.
On the other hand, if you are looking to buy a car jack for your car workshop or garage. I will highly recommend you guys to spend a little more but get something durable so that it can last way longer than its expected life.
Frequently Asked Questions About Best Low Profile Floor Jack
Q- How do I choose a low profile floor jack?
Ans– A low profile floor jack can you can choose based on the work you are going to do. There are many factors involved while buying a low profile floor jack. All of those factors have been explained thoroughly in the above buying guide. You can go through the manual and purchase the one which suits you the best.
Q- Can you lift heavier than the mentioned lift capacity?
Ans- Manufacturers generally put less lift capacity than real on the products to be on the safer side. However, I would never recommend you lifting more weight than the one mentioned in the box.
You will not only damage the jack, but there is a very high probability that you might end you slipping and damaging the car. It will end up costing you a lot of money. So please always be on the safer side.
Q- Are jack stands necessary while working on a car or floor jack is enough?
Ans- A floor jack you can use to lift the car from the ground. Never, ever use a floor jack for working. Always put jack stands beneath the vehicle after lifting it. There is always a possibility that the seals of the jack might leak, and that might make your car fall, which is not good at all.
Q- Is a cheaper floor jack as good as an expensive one?
Ans- As far as jacks are concerned, you get what you pay for. For example, if a jack is cheaper, it will be made of aluminum and will be lightweight. However, an expensive jack will be steel made up. It will have a lower lifting height and much higher lifting capacity than usual.
Conclusion
If you read this article, you are a car enthusiast or a workshop owner, which means that you have to get your hands dirty working on cars. This means that you need to own this handy tool and save yourself from damaging your cars using traditional jacks. I hope this guide helped you all in making the perfect purchase decision for your upcoming car jack.
?? “For example if a jack is cheaper, it will be made of aluminum”?
No, all else equal (otherwise same grade/quality of jack), making it aluminum raises the price about 25-30%. It is true that you can’t get much over 3 ton in aluminum, so the best high capacity jacks are steel, but these so-called racing jacks are more expensive rather than cheaper.
“Also, if you need a jack that can lift SUVs and Jeeps as well, then make sure to keep a looking at the maximum lift range. It is generally 14- 17 inches, which are quite significant.”
This is better done by measuring the vehicle lift on a jack to determine minimum range needed. Often with taller SUVs or pickups, you need at least 20″ of lift. For example some Jeep products with a stock suspension, wheels, and tires, can barely if at all get the tires off the ground at 18″ of lift.