Dot 3 brake fluid can be used in Harley motorcycles, however it is not the recommended fluid. Dot 4 brake fluid is a higher performance fluid and is what Harley recommends for their bikes. Dot 3 brake fluid has a lower boiling point than Dot 4, which means it is more likely to cause brake fade.
- Open the reservoir cap and check the level of fluid
- If it is low, add Dot 3 brake fluid until it reaches the “full” line
- Check your Harley’s owner manual to see what type of brake fluid is recommended
- Pour some of the new Dot 3 brake fluid into a clean, dry glass container
- Suck up the new fluid into a clean syringe or turkey baster
- Slowly squirt the new fluid into the reservoir, being careful not to overfill it
- Replace the cap when finished
Harley Davidson Brake Fluid
Brake Fluid Price
Brake fluid is one of the most important fluids in your vehicle, and it’s also one of the most expensive. The average price of brake fluid is around $30 per gallon, but it can range anywhere from $15 to $50 per gallon. There are a few factors that will affect the price of brake fluid, including the type of vehicle you have and the brand of fluid you choose.
The type of vehicle you have will be the biggest factor in determining the price of your brake fluid. If you have a luxury car or SUV, you can expect to pay more for your brake fluid than someone with a standard sedan or truck. This is because luxury vehicles require a higher quality and more expensive brake fluid to ensure proper performance.
The brand of brake fluid you choose will also affect the price. There are many different brands on the market, and each one offers its own unique benefits. Some brands are cheaper than others, but they may not offer the same level of quality or performance.
When choosing a brand, be sure to do your research to find one that meets your needs and budget.
Credit: www.denniskirk.com
What Brake Fluid is Recommended for Harley Davidson?
Harley-Davidson recommends using DOT 3 or 4 brake fluid in their motorcycles. DOT 3 is a glycol-based fluid that can absorb water, while DOT 4 is a silicone-based fluid that doesn’t absorb water but has a lower boiling point. Either type of fluid will work fine in Harley motorcycles, so it’s up to the rider to decide which one they prefer.
What Happens If You Use Dot 3 Instead of Dot 4 Brake Fluid?
If you use DOT 3 brake fluid instead of DOT 4, your brakes will not work as well. DOT 3 is a lower-performance brake fluid and does not provide the same level of braking power as DOT 4.
Do You Have to Use Harley Brake Fluid?
Harley-Davidson recommends that you use their brand of brake fluid in your motorcycle. This is because Harley-Davidson has tested their fluids to make sure they are compatible with the materials used in their braking system components. Other fluids may not be compatible and could cause damage.
Can You Use Dot 3 Brake Fluid in a Motorcycle Clutch?
DOT 3 brake fluid is a glycol-based fluid that can be used in motorcycle clutches, but it is not the recommended fluid. DOT 4 and DOT 5.1 fluids are designed specifically for use in motorcycle clutches and provide better performance.
Conclusion
The blog post discusses whether or not Dot 3 brake fluid can be used in a Harley motorcycle. The author notes that while many people believe that this type of fluid is not compatible with Harley bikes, there is no evidence to support this claim. The author goes on to say that Dot 3 fluid is actually more effective than the fluids typically used in Harley motorcycles, and that it can help to improve the performance of your brakes.