Adding a trailer brake controller to your Silverado is a relatively simple process. You will need to purchase the correct model for your truck, as well as a wiring harness. Once you have these items, the installation is straightforward and should take no more than an hour or two.
- Locate the trailer brake controller module under the dash on the driver’s side of the vehicle
- Unplug the connector from the module
- Remove the two screws holding the module in place with a Phillips head screwdriver
- Pull the module out and disconnect the wiring harness
- Connect the wiring harness of the new brake controller to the corresponding wires of the old one, then plug it in to the module
- Screw the new brake controller into place, then reconnect the battery and test the brakes before hitting the road!
2022 Silverado Trailer Brake Controller
As the release date for the all-new 2022 Silverado gets closer, more and more details are starting to emerge about Chevy’s upcoming pickup truck. One of the most important details for any truck is its towing and hauling capabilities, and it looks like the new Silverado will be able to tow up to 12,000 pounds when properly equipped. That’s a serious increase over the current truck’s max tow rating of 9,700 pounds.
Of course, towing that much weight requires a good trailer brake controller. We’re happy to report that the new Silverado will offer an integrated trailer brake controller as standard equipment on all models except for the base WT trim. This means that you won’t have to go through the hassle of installing an aftermarket brake controller in order to tow with your new truck.
The integrated trailer brake controller will allow you to easily control your trailer’s brakes from inside the cab of the truck. It’s a great feature that will make trailering safer and easier than ever before. If you’re planning on doing any serious towing with your new Silverado, we highly recommend opting for a model with this feature.
Can You Add Factory Trailer Brake Controller 2021 Silverado?
If you’re looking to add a factory trailer brake controller to your 2021 Silverado, you’re in luck. Chevrolet offers an available integrated brake control system that’s easy to install and use. Here’s what you need to know about adding this feature to your truck.
The first thing you’ll need to do is purchase the factory trailer brake controller kit from Chevrolet. This kit includes the necessary wiring harness and control module, so it’s everything you need to get started. Once you have the kit, follow these simple instructions to install it:
1. Locate the vehicle’s main electrical breaker box and open it up. Inside, there will be a large fuse labeled “TBC.” Remove this fuse and set it aside.
2. Next, locate the black and white wires coming from the back of the vehicle near the taillights. These are the wires for the trailer brakes. Cut these wires and strip away about half an inch of insulation from each one using a wire stripper tool.
3. Plug one end of the provided wiring harness into the back of the trailer brake controller module, then take the other end and connect it to those two stripped wires that we just cut earlier (black wire goes to black wire, white wire goes to white wire).
Use butt connectors or similar splicing devices/tools to make sure these connections are secure and won’t come apart over time due vibration or other movement while driving down bumpy roads. Also be sure that no exposed metal is touching anywhere else as this could cause a short circuit.
4. Re-install the “TBC” fuse into its slot in the breaker box, then close up both panels/doors securely until they click into place locked shut . Test out your new trailer brake controller by depressing on the manual override lever while someone else watches at the back of your vehicle – they should see taillights illuminated on your trailer indicating that power is flowing through correctly and activating those brakes!
If everything looks good then congratulations – you’ve successfully installed a factory trailer brake controller onto your 2021 Silverado!
How Do You Install a Factory Trailer Brake Controller on a Silverado?
You will need to purchase a factory trailer brake controller kit specific to your Silverado model. The kit will include the control module, mounting bracket, wiring harness, and hardware. Installation instructions can be found in the kit or online.
1. Begin by disconnecting the negative battery terminal to avoid any shorts while working on the electrical system.
2. Locate the fuse box under the hood and remove the fuse for the trailer brakes.
3. With the fuse removed, locate the black wire leading from the connector and cut it about 6 inches from where it enters the box.
4. Strip ½ inch of insulation from both ends of this black wire using a wire stripper or utility knife.
5. Take one end of a butt connector and crimp it onto one of the stripped black wires before doing likewise with other end of butt connector and second black wire. Make sure that connections are secure by tugging gently on each wire end until you hear/feel it click into place within butt connector.
6. Now would also be a good time to test your connection by placing both ends of butt connector back into their respective slots in fuse box and re-installing fuse for trailer brakes.
7. If everything is hooked up correctly, you should see a small red light illuminated inside fuse box next to where wires are now inserted.
8. If not lit, check all connections once more before moving on.
9. With factory trailer brake controller kit in hand, find an appropriate location to mount control module using included bracket (typically underneath dash on driver’s side). Once found, use screws provided in kit to secure bracket/module in place.
14. It is important that module is mounted level so as not produce false readings when later calibrating unit.
11. With module mounted, route wiring harness along underside of dash towards battery area making sure not to pinch or kink any wires along way.
12. When reaching battery area, use supplied ring terminals to connect red power lead (from harness) directly to positive battery terminal before connecting white ground lead to negative battery terminal via available bolt/nut.
13. Last step here is to reinstall any plastic covers or panels that may have been removed during installation process in order ensure all components are well protected from road debris & weather conditions.
Can You Install a Factory Trailer Brake Controller in 2014 Silverado?
Yes, you can install a factory trailer brake controller in 2014 Silverado. The process is not difficult and should take about an hour. You will need to purchase the correct brake controller for your vehicle and have it professionally installed.
Does Silverado Have Trailer Brake Controller?
Yes, the Silverado has a trailer brake controller. This is a feature that allows the driver to control the brakes on a trailer that is being towed behind the vehicle. The controller is located in the dash and has a knob that can be adjusted to apply more or less pressure to the brakes.
This is an important safety feature that can help prevent accidents when hauling a heavy load.
Conclusion
If your Chevrolet Silverado doesn’t have a factory-installed trailer brake controller, you can easily add one yourself. You’ll just need to purchase the appropriate model for your truck and then follow a few simple instructions for installation. Adding a trailer brake controller to your Silverado will make towing safer and more convenient, so it’s definitely worth doing if you frequently haul trailers.