If you have a lifted truck, there’s a good chance you’ve considered adding rear lift blocks. But before you do, it’s important to know whether or not stacking them is safe.
The short answer is that yes, you can stack rear lift blocks.
However, there are some things you need to keep in mind before doing so. First and foremost, make sure the blocks you purchase are designed for stacking. Not all brands or models are created equal, and some may not be stable when stacked on top of each other.
Secondly, pay attention to the weight rating of the blocks. If your truck is on the heavier side, opt for blocks that can support the additional weight. Finally, use caution when installing stacked lift blocks.
It’s always best to have someone help you so that the process is done safely and correctly.
- Gather the materials you will need to stack the rear lift blocks
- This includes the blocks themselves, as well as any spacers or other hardware that may be required
- Position the first block in place on the vehicle, making sure it is level and properly aligned
- If using spacers, install them between the first and second blocks before proceeding to step 4
- Place the second block on top of the first, again making sure it is level and properly aligned
- Repeat steps 2-4 until all desired rear lift blocks are stacked in place on the vehicle
1/2 Inch Rear Lift Blocks
If you’re looking to give your truck or SUV a little extra height in the rear, then you might want to consider installing some 1/2 inch rear lift blocks. This is a relatively simple and inexpensive way to achieve a small amount of additional ground clearance, which can be helpful if you’re looking to clear larger tires or obstacles.
There are a few things to keep in mind when installing rear lift blocks.
First, it’s important to make sure that the blocks are properly aligned with the axle before tightening down the bolts. Second, you’ll need to use longer U-bolts than usual in order to accommodate the increased height of the suspension. And finally, it’s always a good idea to have an alignment done after any significant change to your suspension setup like this.
Other than that, installing 1/2 inch rear lift blocks is a pretty straightforward process that most anyone can do at home with just basic tools. So if you’re looking for an easy and affordable way to add a little extra height (and maybe even some attitude) to your ride, then this is definitely something worth considering!
What Do Rear Lift Blocks Do?
Rear lift blocks are designed to provide a level lifting point for the rear of a vehicle. They typically attach to the frame or suspension components and provide a sturdy place to connect a winch line or other recovery gear. In some cases, they may also be used to give the vehicle additional ground clearance.
Which Way Does the Taper Go on Rear Lift Blocks?
There are two ways that the taper can go on rear lift blocks, and it really depends on what you are trying to achieve with your vehicle. The first way is with the taper facing towards the front of the vehicle. This will give you more clearance in the back, which can be helpful if you are carrying a lot of weight in the back or if you are constantly going over bumps.
The second way is with the taper facing towards the rear of the vehicle. This will give you more traction in the back, which can be helpful if you are trying to get better performance out of your car.
Can You Lift the Front of a Truck With Blocks?
If you’re looking to lift the front of your truck, there are a few things you’ll need to take into consideration. First, what is the purpose of lifting the front of the truck? If it’s for off-roading or increasing ground clearance, then blocks may be a good option.
However, if it’s for show or simply to make your truck look taller, then blocks may not be the best choice.
Blocks can be used to lift the front of a truck, but they have their drawbacks. One major drawback is that they can change the geometry of your suspension and steering, which can lead to handling and safety issues.
Additionally, blocks can put stress on your drivetrain components and shorten the life of your shocks and struts. If you do decide to use blocks to lift your truck, make sure you get high-quality ones from a reputable manufacturer.
How Do You Install Rear Leveling Blocks?
Assuming you already have your leveling blocks and a drill:
1. Place the leveling block in the desired location on the rear of your vehicle.
2. Use a drill to create pilot holes through the provided holes in the leveling block, and into your vehicle’s frame.
3. Secure the leveling block to your vehicle using bolts, washers and nuts.
4. Repeat as necessary until all rear leveling blocks are installed.
Conclusion
If you have a lifted truck, you may be wondering if you can stack rear lift blocks. The answer is yes, you can! However, there are a few things to keep in mind when doing so.
First, make sure that the blocks you are using are designed for stacking. Second, use caution when stacking the blocks and adhere to the manufacturer’s recommendations. Doing so will help ensure that your truck is safe and stable.