There are many different ways to break a round lock. The most common way is to use a hammer and chisel. However, this method can damage the lock and cause it to be unusable.
Another way to break a round lock is to use a bolt cutter. This method is quick and easy, but it can also damage the lock.
- Using a hammer, hit the end of the screwdriver so that it goes through the keyhole
- Turn the screwdriver until you hear a clicking sound
- Remove the screwdriver and insert a nail file into the keyhole
- File down the pins until they are all flush with the body of the lock
- Remove the nail file and insert a paperclip into the keyhole
- Bend the paperclip until it is straight, then insert it into one of the holes in the body of lock and turn clockwise until you feel resistance
- Repeat step 6 for each hole in the lock body
How to Break a Disc Padlock
Disc padlocks are one of the most common types of locks used today. They are often used to secure gates, fences, and other outdoor areas. While these locks are very strong and can be difficult to break, there are a few methods that can be used to successfully break them.
One method is to use a bolt cutter. This will require some effort, but if you have a strong pair of bolt cutters, you should be able to snap the shackle of the lock easily. Another method is to use a hacksaw.
This will take longer than using bolt cutters, but it will eventually get the job done.
If you don’t have any tools handy, or if you’re looking for a more brute force approach, you can always try striking the lock with a heavy object. A hammer or even a rock will do the trick.
Just make sure that whatever you use has enough force behind it to break through the metal of the lock.
With any luck, one of these methods will help you successfully break your disc padlock so that you can gain access to whatever it is securing.
Credit: en.wikipedia.org
How Do You Open a Round Lock?
Assuming you are referring to a padlock with a circular keyhole: To open a round lock, insert the key into the keyhole and turn it clockwise. The locking mechanism will disengage and the lock will open.
How Do You Break a Round Lock With a Hammer?
Breaking a round lock with a hammer is not as difficult as it may seem. There are a few things to keep in mind, however, before attempting this. First, make sure that the head of the hammer is small enough to fit inside the keyway of the lock.
Second, use a sharpened chisel or screwdriver to score a line around the circumference of the lock body. This will help the hammer head to grip the body of the lock when you start striking it. Finally, start hitting the lock with moderate force until it breaks open.
How Do You Open a Round Lock With a Drill?
If you need to open a round lock with a drill, there are a few things you need to keep in mind. First, make sure that the drill bit is slightly smaller than the diameter of the lock. This will ensure that you don’t damage the lock while drilling.
Next, center the drill bit on the top of the lock and start drilling slowly. As you drill, apply pressure to the drill bit so that it stays in place. Once you’ve drilled through the top of the lock, continue drilling until the bit comes out through the bottom of the lock.
Finally, use a screwdriver or other tool to turn the locking mechanism and open the lock.
How Do You Break a Puck Lock?
If you’re looking to break a puck lock, there are a few things you can try. The first is to use a hammer or other heavy object to strike the end of the shackle. This will hopefully loosen the locking mechanism and allow you to pull it apart.
If this doesn’t work, you can also try heating up the shackle with a blow torch or other heat source. This will expand the metal and hopefully allow you to pull it apart. Finally, if all else fails, you can always saw through the shackle with a hacksaw or other cutting tool.
[523] Disc Padlock: Twist Attack
Conclusion
Assuming you are referring to a padlock, the first step is to find something thin and strong that you can insert into the lock. This could be a bobby pin, paperclip, or even a sewing needle. Once you have your chosen object, straighten it out as much as possible so that it can fit easily into the keyhole.
Now, take a look at the lock and locate the small hole on the side or bottom of the lock. This is where you will insert your object. Once your object is in the hole, apply pressure and turn it clockwise until you feel resistance.
At this point, stop applying pressure and simply turn the lock itself clockwise until it opens.