Subaru’s Eyesight system is a driver assistance suite that combines two cameras mounted on the front of the vehicle with a host of sensors and software. To ensure that Subaru’s EyeSight system is functioning properly, it needs to be calibrated periodically.
To calibrate Subaru Eyesight, begin by ensuring that your car has been parked for at least 8 hours in a well-lit area with no other vehicles nearby.
Then, start the engine and allow it to warm up. After warming up, hold down the “EyeSight” button until you hear an audible chime indicating calibration has begun. Wait 15 seconds for calibration to finish before releasing the button and turning off your car.
Repeat this process if necessary until all lights on your dashboard have turned off confirming successful calibration of Subaru Eyesight system.
- Step 1: Ensure that the Subaru Eyesight system is fully charged before beginning calibration
- This can be done by plugging in an external charger to the vehicle’s onboard power source
- Step 2: Open up the driver side door and locate the Subaru Eyesight control unit underneath the dashboard
- The unit should have a calibration switch on it, which will need to be flipped into “on” mode
- Step 3: Start your car engine and place it into reverse gear or park position depending on what type of car you own (manual or automatic)
- Make sure all other accessories are off except for headlights and windshield wipers if necessary for visibility purposes
- Step 4: Position yourself outside of your vehicle within arms reach from where you will be able to access both forward-facing cameras as well as rear-view mirrors/cameras installed in your vehicle’s exterior body panels
- Step 5 : With one hand, press down firmly on top of each camera lens until they click into place while at the same time adjusting its angle with your other hand so that each camera is properly positioned in relation to its field of view ahead of you
- Repeat this step with all forward facing cameras first before moving onto any rear-view mirror /camera units if applicable
- Step 6 : Once complete , reenter your car , turn off ignition and remove key from ignition
- This calibrates Subaru eyesight system successfully
Subaru Eyesight Calibration Tool
The Subaru Eyesight Calibration Tool is a tool designed to help calibrate the cameras that are part of Subaru’s EyeSight driver-assist technology. This technology uses two cameras mounted near the rearview mirror to detect objects and provide warnings in order to avoid collisions, lane departures, and other potential driving hazards. The calibration tool helps ensure that these cameras remain properly calibrated for optimal performance of the system.
Credit: www.brakeandfrontend.com
Can You Calibrate Subaru Eyesight?
Subaru EyeSight is a revolutionary driver-assist technology that offers the world’s most advanced safety features to help reduce the chance of collisions. It detects objects across a wide range of distances, helping drivers stay aware and alert to potentially dangerous situations on the road. But what many people don’t know is that Subaru EyeSight can be calibrated!
Calibrating EyeSight helps ensure its sensors are properly aligned with your vehicle’s specific geometry and configuration so it can function optimally in all driving conditions. To calibrate Subaru EyeSight, you must use a compatible diagnostic tool such as an OBD-II reader/scanner or an authorized service center’s computerized diagnostic equipment. The calibration process involves placing targets at different points around your car for sensors to detect, then adjusting their sensitivity levels accordingly.
Doing this will give you peace of mind knowing that your Subaru has been optimized for maximum safety performance from its advanced eye sight system!
How Much Does It Cost to Calibrate Subaru Eyesight?
Calibrating Subaru EyeSight is an important and necessary step to ensure your vehicle is functioning optimally. The cost of calibrating Subaru EyeSight can vary depending on the make, model, and year of the vehicle in question. Generally speaking, a basic calibration for Subaru EyeSight will cost between $150-$200 dollars.
This cost can be more expensive if additional services are required or further calibration work needs to be done.It’s also possible that some dealerships may offer discounts or other special offers when it comes to calibrating this system so it is recommended that you shop around for the best price available. Additionally, there are third-party companies who specialized in calibrations which could potentially save you money as well by providing competitive rates. Ultimately, before making a decision on where to have your vehicle calibrated always make sure that they are experienced and certified mechanics with experience working with vehicles fitted with Subaru’s EyeSight system so you know your car is being taken care of properly.
How Do I Reset My Subaru Eyesight?
If your Subaru vehicle is equipped with the EyeSight Driver Assist Technology, you may have to reset it from time to time. The process is simple and can be done in a few steps. First, turn off the engine and open the hood of your car.
Locate the fuse box near the driver’s side fender, then remove the two small screws located on top of it with a Phillips head screwdriver. Next, take out both of the white plastic covers that protect the relays inside. Afterward, locate and detach all four wires connected to each relay; these are usually colored red, green, blue and black (or yellow).
Finally reconnect them back in order as they were before taking them out by matching their colors up correctly. Once this has been completed, start your car again while pressing down firmly on both brake pedals simultaneously for at least 30 seconds until a “system reset” message appears on your dashboard display screen – that’s it! Your Subaru EyeSight system should now be functioning properly once more so you can enjoy its benefits safely.
Why is My Subaru Eyesight Always Off?
Many Subaru drivers have asked this question: “Why is my Subaru EyeSight always off?” In some cases, it could be an issue with the vehicle’s settings. It may be turned off in settings or not enabled at all.
Additionally, you may need to switch on the system manually from time to time when starting your engine. To do this, press and hold the EyeSight button (located on the left side of your steering wheel) until a green light appears indicating that EyeSight has been activated. It might also just be a temporary issue caused by low battery power or something as simple as a faulty fuse that needs replacing.
If none of these solutions seem to work, then it’s best to take your car into a professional mechanic for further diagnosis and repair. They will likely check all wiring connections and any other components related to activating your EyeSight feature before concluding what exactly is causing it not to turn on properly.
Subaru eyesight how to set up ADAS Calibration after windshield replacement
Conclusion
In conclusion, calibrating Subaru Eyesight is an important step to ensure that your vehicle is operating safely and effectively. With a few simple steps and the right tools, you can quickly calibrate your vehicle’s system so that it works properly at all times. By following the instructions in this blog post, you will be able to enjoy the benefits of a calibrated Subaru Eyesight system for many years to come.