It is not a surprise that in Dodge Ram, a very advanced and sophisticated alarm system comes in-built. The main aim is to protect the car against any instance of theft or tampering, which may damage the reputation of the brand.
Dodge Ram alarm systems are in-built with the ignition systems of the car. This ignition system comes with a programmed fob or a key. Any damage to the fob, for instance, in the case of batteries draining or misplacing your fob, may cause trouble.
At this point, the alarm system has no way of distinguishing you, the owner, and an intruder sneaking to get your car. False alarms can also be a nuisance, especially when the risk of car theft is low. This is when you may find it better to disable the alarm system. If you do not need an alarm system, then there are numerous ways as to how to disable alarm on Dodge Ram.
This blog will shed light on how to disable alarm on Dodge Ram.
Ways of Disabling a Dodge Ram Alarm
It is possible as to how to disable alarm on Dodge Ram by taking two ways into account. The first way is to disable the relay, earth the alarm system to the chassis, or disconnect it.
Disable the Alarm Relay System
While inside your car, pull on the latch that opens the hood of your Ram. Always ensure safety by fastening the prop bar properly. Inside the hood, locate the battery since it holds the key as to how to disable alarm on Dodge Ram.
Locate the negative terminal of the battery and the socket latched on the terminal. Flip this socket while slowly turning it in a counterclockwise direction. This motion loosens the socket on the terminal, which is essential. Do not put unnecessary force on the terminal, resulting in damage that can destabilize other systems in the car.
Once the socket is loose, pull on the terminal upwards and away from the battery’s negative point. Fasten the terminal freely on a detached part of the hood. However, you can also hold the terminal away from the battery for approximately five minutes. This allows the alarm enough time to reset its timer.
The last step is to locate the relay box, which is located beneath the Dodge Ram hood. On the side of the fuse box or the engine, find the relay box and flip its lid open. Use a flat-head screwdriver for this step and open the lid by flipping it over. A circuit diagram is located on the inside cover of the lid with convenient labels. Use these labels to locate the Dodge Ram alarm relay. Slowly reach out and remove the relay out of the relay cover.
The alarm system is thus disabled but still allows you to control your Dodge Ram, such as the ignition. After this last step, replace everything in the relay box and close the lid. Then locate the free negative terminal and return it to the original position.
Earth the Alarm System
The other way of how to disable alarm on Dodge Ram is by earthing the alarm system. Inside the car, locate the driver kick panel. In Dodge Ram, you will find a plug, mainly black. At this plug, located an orange or green wire. This is the system disable wire designated for factory disarming of the alarm system. Carefully, splice inside this wire and make sure that not too much of the inside is exposed. Using another wire, which has the same gauge as the disarm wire, insert and splice a little deeper into the wire.
The wire used to splice should have a portion hanging outside the disarm wire. Hook this portion to the chassis of the Dodge Ram, thus effectively disarming the alarm. The alarm functionality is hindered at this point onwards and cannot be triggered.
Luckily, this method does not destroy the alarm system entirely, and it can be easily recovered if need be. To recover the alarm functionality, remove the splicing wire. Open the hood of the Dodge Ram and unhook the battery. Leave the battery in this state at night and hook it up again in the morning.
How to disable alarm on Dodge Ram?
If you can recall how to disable alarm on Dodge Ram, then detach the alarm relay. Inside your truck, locate the main panels of the dashboard of the Dodge Ram. Use a flat head screwdriver to pry the panels open. Ensure you target the panels surrounding the alarm system to avoid damage to other sections of the car circuit. You can find them just below the column of the steering wheel. This is also below the ignition cylinder system under the dashboard.
Open the panel; locate the alarm wires, which can be drawn back to the battery terminals. Choose the one that can be visible to the positive terminal of the battery. The Dodge Ram alarm is in connection to the amp, which is responsible for producing the sound and the sirens that are a key part of the alarm system. While still tracing the wire to the positive terminal of the battery, disconnect it from the amp. This ensures that the alarm will not produce any sound. Now replace everything in the panel and slide the lid back in its place.
The working of the Dodge Ram Alarm System
The Dodge Ram alarm system is an integrated circuit consisting of an array of sensors, a control unit, sirens, a battery, and radio receivers. This ensures that the input of the alarm system has different sources. These sources provide the required protection against any theft or tampering the car system. The activation and deactivation of the alarm in the car are possible remotely using a remote controller that also controls other aspects of the vehicle, such as the ignition. However, there are various methods as to how to disable alarm on Dodge Ram.
In some sophisticated alarm systems, part of the electronic door lock run from the alarm system. This is made possible through a Central Timer Module, which activates the car doors and other antitheft systems such as ignition, window control, and other methods. This ensures maximum protection in the event of theft or tampering, allowing adequate response time while also creating a tamperproof alert system.
Precautions to take while disabling a Dodge Ram alarm
Suppose you decide to disable your Dodge Ram alarm. In that case, you should take some measures since it is always in your best interests to have a functioning alarm system. All the methods described for disabling the alarm system can be easily reversed to a fully functioning alarm system.
If this is not an option, institute secondary measures against theft or tampering. These can include locking your car in a safe garage or parking in secure areas. Institution motion sensors around the vicinity of the parked Dodge Ram can also offer good protection.
Lastly, always make contingencies for reinstalling the alarm system. It remains the best protection against theft or tampering. Any loss of the vehicle or its parts can be costly. The alarm system offers the right way of protecting against such losses.