Modernizing your Ford F-150 has never been easier, and one popular upgrade that can add a touch of convenience and style is installing a push button start. By eliminating the need for a traditional ignition key, a push button start enhances your driving experience and brings a contemporary flair to your beloved truck. If you’re ready to embark on this DIY project, we’ve got you covered with a step-by-step guide on how to install a push button start in your Ford F-150. So, buckle up and let’s get started!
Disclaimer: Modifying your vehicle’s electrical system requires technical expertise and should be done at your own risk. If you’re uncertain about any step, it is highly recommended to consult a professional or an automotive specialist.
Step 1: Gather the Required Tools and Materials
Before you dive into the installation process, make sure you have all the necessary tools and materials at your disposal. Here’s a list of items you’ll need:
- Push button start kit: Purchase a quality kit from a reputable supplier. Ensure that it’s compatible with your Ford F-150 model and year.
- Screwdrivers: Prepare a set of flathead and Phillips screwdrivers to remove any panels or components that obstruct access to the wiring.
- Wire cutters/strippers: These tools are essential for trimming and preparing the wiring connections.
- Electrical tape: Use electrical tape to secure the connections and prevent any potential shorts.
- Multimeter: A multimeter will help you test the electrical connections and ensure everything is functioning properly.
- Zip ties: These will come in handy for securing the wiring and preventing any unwanted movement or interference.
Step 2: Disconnect the Battery
Safety should always be a priority when working with electrical components. Begin by disconnecting the negative terminal of the battery to avoid any accidental electrical surges or shorts.
Step 3: Remove the Dashboard Panel
To access the ignition wiring, remove the lower dashboard panel. Gently pry it away using a flathead screwdriver or a plastic trim removal tool. Be cautious not to damage any clips or connectors during this process.
Step 4: Identify the Ignition Wiring
Locate the ignition wiring harness, which will usually be a bundle of wires connected to the back of the ignition switch. Refer to your vehicle’s manual or wiring diagram to identify the necessary wires. The main wires you need to locate are the ignition, starter, and accessory wires.
Step 5: Connect the Push Button Start Wiring
Using the wire cutters/strippers, carefully strip a small portion of insulation from the identified ignition, starter, and accessory wires. Connect the corresponding wires from the push button start kit to their respective counterparts. Secure the connections using electrical tape or heat shrink tubing for added protection.
Step 6: Mount the Push Button Start
Choose a suitable location to mount the push button start. It’s recommended to select a place that is easily accessible and within reach of the driver. Ensure that the location does not interfere with any other dashboard components or obstruct visibility. Use the provided mounting bracket or a custom bracket to secure the push button start in place.
Step 7: Test and Reassemble
Before reassembling the dashboard panel, reconnect the battery’s negative terminal. Double-check all the connections and wires to make sure everything is securely fastened. Test the push button start by pressing it while turning the ignition switch to the “ON” position. If the engine starts and all electrical components function correctly, you have successfully installed the push button start.
Push/start button install 2019 F-150
Can You Add Factory Remote Start to F150?
Adding a factory remote start to your Ford F-150 is a great way to make your life easier. Not only will it make it easier to get into your truck on cold mornings, but you’ll also be able to keep the interior cool in the summer. There are a few different ways that you can go about adding a remote start to your truck, so we’ll walk you through each option.
The first option is to buy an aftermarket remote start kit and have it installed by a professional. This is generally the most expensive option, but it will also give you the most flexibility when it comes to features and installation. Aftermarket kits usually come with better instructions and customer support than factory kits, so this is something to keep in mind if you’re not comfortable working on your own vehicle.
The second option is to buy a factory remote start kit from Ford. These kits are usually less expensive than aftermarket options, but they can be more difficult to install. We recommend having a professional do the installation if you go this route, as there are some delicate steps involved.
However, if you’re comfortable working on your own vehicle and willing to take on the challenge, installing a factory kit can be rewarding. Once you’ve decided which route you want to take, follow the instructions that come with your chosen kit carefully. If you have any questions during the process, don’t hesitate to reach out for help – either from the customer support line for your chosen product or from an experienced friend or mechanic.
With careful installation and use, adding a remote start system to your F-150 will make those hot summer days or cold winter mornings much more bearable!
Credit: www.youtube.com
Can Push Button Start Be Installed?
Push button start can be installed in most cars. The installation process is typically simple and does not require any special tools or skills. However, it is always best to consult your car’s owner manual or a professional mechanic before starting any work on your car.
Can You Convert a Key Ignition to Push Button?
You can convert a key ignition to push button, but it’s not a simple process. You’ll need to remove the entire ignition system from the vehicle and then wire in a new push button ignition. This is not a job for the faint of heart – if you’re not comfortable working with electrical systems, it’s best to leave this conversion to a professional.
Can I Upgrade to Ford Factory Remote Start?
If your Ford vehicle didn’t come with remote start from the factory, you’re in luck. You can easily add this feature to your car with a little help from your local Ford dealer. Here’s what you need to know about adding remote start to your Ford.
To upgrade to Ford factory remote start, first check to see if your car is compatible. All you need is power door locks and an automatic transmission. If your car has these features, then it’s likely that it can be equipped with remote start.
Next, visit your local Ford dealer and purchase the necessary parts. This includes the remote start module, two key fobs, and installation instructions. Once you have these items, follow the instructions provided to install the system in your car.
Once installed, you’ll be able to use your key fob to remotely start your engine from up to 300 feet away. This is a great feature for those cold mornings when you don’t want to leave the warmth of your home just yet. It’s also handy for pre-warming your car on hot days so that you don’t have to get into a scorching hot vehicle later on.
Overall, adding remote start to your Ford is a relatively easy process and well worth the investment – especially if you live in an area with extreme temperatures!
Conclusion
Installing a push button start in your Ford F-150 is a rewarding DIY project that can bring a touch of modernization to your truck. By following this step-by-step guide and exercising caution throughout the process, you’ll be able to enjoy the convenience and style of a push button start in no time. However, always remember to prioritize safety and consult a professional if you encounter any difficulties or uncertainties along the way. Happy upgrading!