To remove a link from a chainsaw chain, you will need to use a pair of pliers. First, find the rivet that is holding the link in place. Second, use the pliers to grip the head of the rivet and pull it out.
Third, remove the link from the chain.
- Unplug the chainsaw from its power source
- Use a chain breaker tool to remove one of the outer links from the chain
- Remove the broken link from the chainsaw bar
- Reattach the chain to the bar, making sure that all of the links are properly aligned
Chainsaws & Tools : How to Shorten the Chain on a Chainsaw
How to Shorten Chainsaw Chain Without Tool
If you’re using a chainsaw regularly, it’s inevitable that the chain will eventually become too long and need to be shortened. While you could take it to a professional to have the work done, it’s actually quite easy to do yourself at home with just a few tools. Here’s how:
First, start by loosening the chainsaw’s bar clamping screws so that the bar can slide back and forth. Next, find the rivet connecting links on either side of the saw chain and use a punch or nail set to drive out the rivets. Once the rivets are removed, you can simply remove any excess links from the chain until it is the desired length.
Finally, re-insert the rivets (making sure they are facing inwards) and tighten up the bar clamping screws.
And that’s it! Shortening your chainsaw chain is really simple to do and only requires a few tools.
So next time it starts getting too long, don’t hesitate to give it a go yourself!
Credit: burlybeaver.com
Can You Take a Link Out of Chainsaw Chain?
It is possible to take a link out of a chainsaw chain, but it is not recommended. Doing so can weaken the chain and make it more likely to break. If you must remove a link, use a pair of pliers or a hammer and punch to drive the rivet out of the link.
How Do You Take a Link Out of Chain Saw?
If your chain saw has a broken link, you’ll need to remove it before you can continue using the saw. Here’s how to do it:
1. First, find the broken link in the chain.
You may need to clean off any grease or debris that’s obscuring it.
2. Once you’ve found the broken link, use a pair of pliers to bend open the connecting pin on either side of the link.
3. With the connecting pins bent open, you should be able to simply slide the broken link out of the chain.
4. To reassemble the chain, simply insert a new link (or links, if more than one is broken) and close the connecting pins with your pliers.
What is the Trick to Untangling a Chainsaw Chain?
If you’ve ever had the unfortunate experience of having your chainsaw chain become tangled, you know how frustrating it can be. The good news is that there is a relatively simple way to untangle a chainsaw chain. Here’s what you need to do:
1. First, identify where the tangles are located. This can be done by running your fingers along the length of the chain.
2. Once you’ve identified the location of the tangles, use a pair of pliers to gently pull apart any links that are caught together.
3. Next, use a brush or other tool to loosen any dirt or debris that may be causing the links to stick together.
4. Finally, re-assemble the chain and make sure that all links are properly aligned before using your chainsaw again.
Can a Chainsaw Chain Stretch Too Much?
If you’ve ever used a chainsaw, you know that the chain is under a lot of tension. This is necessary to ensure that the chain stays tight against the bar while it’s running. However, if the chain becomes too loose, it can start to stretch out.
Eventually, this can cause the chain to come off entirely.
So, can a chainsaw chain stretch too much? Yes, it definitely can!
If you notice that your chainsaw chain is starting to get loose, be sure to tighten it up as soon as possible. Otherwise, you risk thechain coming off and potentially causing serious injury.
Conclusion
If your chainsaw chain is damaged, you may need to remove a link from it. This can be done with a few tools and a little bit of know-how. First, you’ll need a pair of pliers and a hammer.
You’ll also need to find the rivet that holds the link in place. Once you’ve found the rivet, use the pliers to grip it tightly. Then, use the hammer to strike the rivet until it pops out.
Once the rivet is out, you can simply slide the link off of the chain.