To remove the back seat in a Ford Focus, first fold the seat forward. Then locate the two bolts on the underside of the seat near the front. Remove these bolts with a wrench or socket set.
Next, locate the two bolts on the underside of the seat near the rear. Remove these bolts with a wrench or socket set. Finally, lift the seat up and out of the car.
- Open up the back seat of your Ford Focus by pulling on the release handle located on the top of the seat
- Locate the two bolts holding down the back of the seat to the floor and remove them with a socket wrench
- Unplug any electrical connectors that are attached to the seat, such as for power seats or heating/cooling elements
- Lift the seat up and out of the vehicle
Focus Mk4 Rear Seat Removal
If you need to remove the rear seats in your Focus Mk4, there are a few things you need to know. First, you will need to remove the seat cushions. To do this, simply pull up on the front of the seat cushion until it releases from the seat back.
Next, you will need to remove the seat backs. There are two release levers located on the outside edge of each seat back. Pulling up on these levers will allow the seat back to be removed.
With the seat cushions and backs removed, you will now have access to the bolts that hold the seats in place. There are four bolts per side, so eight in total. Once these are removed, you can lift out the entire rear seat assembly and set it aside.

Credit: m.focushacks.com
How Do You Remove the Back Seat in Ford Focus?
Assuming you need to remove the back seat in order to access the trunk:
1. Open the door to the vehicle. If there is a rear center console, lift up on the front of it and pull it towards you to remove it.
Some models may have a release button or lever on the side of the console that must be depressed or lifted before removal.
2. Locate the two bolts at the base of each seatback near where they meet the bottom cushion. Use a socket wrench to remove these bolts.
On some models there may be a plastic cover over these bolts that needs to be pried off with a flathead screwdriver before accessing the bolts.
3. Tilt the seatback forward and pull it out of the vehicle. Be careful not to damage or scratch any surfaces as you do this.
The bottom cushion will still be attached to the vehicle so don’t try to completely remove it unless you need access to something underneath it.
How Do You Put the Back Seat down in a 2007 Ford Focus?
Assuming you would like tips on how to put the back seat down in a 2007 Ford Focus:
There are generally two ways to fold down the back seats in a car – one that requires removing the headrests, and one that doesn’t. The latter is going to be the quicker of the two methods, so we’ll start with that.
To fold down the back seats without removing the headrests, simply locate the release levers on either side of the seatback. These will usually be located just above where the seatback meets the bottom cushion of the seat. Once you’ve found them, pull up on both levers at once and then fold the seatback forward until it locks into place.
If your car has a center armrest between the two rear seats, you may need to lower this first in order to get the lever(s) to engage properly.
The other method – which may be required if your car’s backseat doesn’t have release levers or if they’re difficult to reach – is to remove the headrests before folding down the seats. To do this, simply press down on both ends of each headrest (where they meet up with metal posts protruding from behindthe seat) and pull straight up.
With all four headrests removed, you should then be able to easily fold down both sections ofthe backseat by pulling up on each side where they meet in themiddle (you shouldn’t need any levers for this).
Puttingthe backseat up is generally just a matter of reversing theseprocesses – i.e., pulling up on each side where they meet inthe middle (if there are no release levers) or engaging therelease levers (if present) and pushing/lifting each seatbackinto its upright position until it locks into place. Don’tforget to put those headrests back in before driving off!
How Do You Put the Back Seats down in a 2010 Ford Focus?
Assuming you want to know how to fold down the back seats:
The process for folding down the back seats in a 2010 Ford Focus is actually quite simple. First, locate the release levers on the outside of the seatback.
There are usually two of these, one on each side. Pulling on these levers will unlatch the seatback so that it can be folded down.
Once the seatback is unlatched, simply push it forward and down until it clicks into place.
You may need to use a bit of force to get it to latch properly. And that’s it! Your back seats are now folded down and you have extra space in your car.
How Do I Take My Seat Back Off?
Assuming you’re talking about a vehicle seat:
Most seats these days are held in by either bolts or screws. In order to take your seat back off, you’ll need to remove these fasteners.
Once the bolts or screws are removed, the seat back should come right off.
If your seat is attached with bolts, use a wrench to loosen and remove them. If your seat is attached with screws, use a screwdriver to remove them.
Be sure to keep track of which fasteners go where, as you’ll need to put them back in when you reattach the seat!
Ford Focus Back Seat Removal
Conclusion
Assuming you would like a summary of the blog post titled “How to Remove Back Seat Ford Focus”:
The blog post begins by stating that the back seats in Ford Focuses are held in place by two bolts on each side. It is important to note that there are also plastic clips that need to be removed in order to take out the seat completely.
The author then provides a step-by-step guide on how to remove the back seat. First, they recommend removing the headrests. Next, they say to locate the two bolts on each side of the seat and remove them with a socket wrench.
After the bolts are removed, there will still be plastic clips holding the seat in place. These can be pried off with a flathead screwdriver. Finally, the seat can be lifted out of its place and set aside.
In conclusion, the blog post states that removing the back seat of a Ford Focus is a relatively simple task that can be completed in just a few minutes.