To reset the oil life on your Cadillac ATS, you will need to do the following:
1. Turn on the ignition, but do not start the engine.
2. Press and hold down the trip odometer button for about five seconds.
3. The oil life indicator should now be reset and display 100%.
- Start the engine and let it run for a few minutes to warm up the oil
- Turn the engine off and open the hood
- Locate the oil life reset button, which is usually located on or near the instrument cluster
- Press and hold the reset button for a few seconds until you see the oil life indicator light reset on the dash board display
- Close the hood and start the engine to verify that oil life has been reset successfully
HOW TO RESET OIL LIFE LIGHT CADILLAC ATS
Reset Oil Life Cadillac Ats 2014
If you’re like most people, you probably don’t think much about your car’s oil. But did you know that changing your oil regularly is one of the most important things you can do to keep your car running smoothly?
Most cars these days have what’s called an “oil life indicator” that tells you when it’s time to change your oil.
But sometimes these indicators can be inaccurate, so it’s always a good idea to check your owner’s manual to see when the manufacturer recommends changing your oil.
If you have a Cadillac ATS from 2014 or newer, resetting the oil life indicator is easy! Just follow these simple steps:
1. Turn on the ignition without starting the engine.
2. Press and hold the trip odometer button until “OIL LIFE RESET” appears in the display.
3. Press and release the trip odometer button again to confirm.
The display will show “100%.” That means your oil life has been reset and you’re good to go!
Credit: carhowto.com
How Do You Reset the Oil Life on a Cadillac Ats?
If you need to reset the oil life on your Cadillac ATS, there are a few different methods that you can use. The most common and easiest method is to simply press and hold the trip odometer button on your instrument panel for about five seconds. Once the indicator has been reset, it will display “100%” to let you know that the oil life is now full.
You can also reset the oil life by using the DIC menu on your vehicle’s infotainment system. To do this, press the Menu button on your infotainment system and then select “Vehicle Settings”. From here, scroll down to “Engine Oil Life” and press enter.
Once you see the current percentage of oil life remaining, press and hold the enter button until it resets back to 100%.
How Do You Reset the Oil Light on a 2014 Cadillac Ats?
Assuming you would like a step-by-step guide on how to reset the oil light on a 2014 Cadillac ATS:
To reset the oil light on your 2014 Cadillac ATS, follow these steps:
1. Park your ATS in a level spot and turn off the engine.
Do not restart the engine.
2. Open the hood and locate the dipstick. Pull it out and wipe it clean with a rag.
Replace it and screw it back in until it is snug. Do not over tighten as this can damage the threads.
3. Locate the oil fill cap on top of the engine and unscrew it to remove it.
4. Using a funnel, pour in 4 quarts (3.8L) of fresh oil into the opening until full. You may need to check the level again after adding oil to ensure that you have added enough – do not overfill!
5+6 Close up both openings by screwing on their caps/lids securely – be sure not to over tighten these either!
How Do I Reset the Oil Life on a 2013 Cadillac Ats?
If you need to reset the oil life on your 2013 Cadillac ATS, here’s how:
1. Start the engine and let it run for a few minutes to warm up.
2. Turn off the engine and wait a few minutes for it to cool down.
3. Locate the oil life reset button on the instrument panel. It should be near the bottom left of the cluster.
4. Press and hold the reset button for about 5 seconds until you see “100% RESET” appear in the display.
How Do You Reset the Oil Life on a 2015 Cadillac?
When you change the oil in your 2015 Cadillac, you will need to reset the oil life monitor. This can easily be done by following these steps:
1. Start the engine and let it idle for a few minutes.
2. Press and hold the trip odometer button on the instrument panel.
3. While holding the trip odometer button, press and release the gas pedal three times within five seconds.
4. The oil life indicator will now reset and begin counting down from 100% once again.
Conclusion
If your Cadillac Ats is due for an oil change, you may be wondering how to reset the oil life indicator. This article will show you how to do just that! The oil life indicator is designed to let you know when it’s time to change your vehicle’s oil.
It takes into account things like driving habits and engine conditions. When the indicator reaches 0%, it’s time for a change. To reset the indicator, simply follow these steps:
1. Start the engine and turn off all accessories 2. Press and hold the trip odometer button 3. While holding the button, turn the ignition to “run”
4. Continue holding the button until “OIL LIFE 100%” appears on the display 5. Release the button 6. Start driving!
Now you know how to reset the oil life indicator on your Cadillac Ats .