To turn off the automatic high beams in a Jeep Grand Cherokee, press and hold the button on the left side of the steering column. The indicator light will turn off when the high beams are turned off.
- Locate the high beam light switch on the left side of the steering column
- Use your index finger to push and hold the top part of the switch in
- While holding the top part of the switch in, use your thumb to push and release the bottom part of the switch
- The high beams should now be turned off
Headlight Controls | How To | 2020 Jeep Grand Cherokee
How to Turn on Automatic High Beams Jeep Grand Cherokee L
If your Jeep Grand Cherokee is equipped with automatic high beams, you can take advantage of this feature by turning it on. Here’s how:
1. Put the Jeep Grand Cherokee in drive and depress the brake pedal.
2. Rotate the headlight switch to the autolamp position.
3. Depress and release the left turn signal lever three times within five seconds. The headlights will flash to indicate that they’re in auto-high beam mode.
Credit: jeepspecs.com
How to Turn off Automatic High Beams Jeep Grand Cherokee L?
If you’re driving a Jeep Grand Cherokee L and you want to turn off the automatic high beams, there are a few things you’ll need to do. First, locate the high beam light switch on the left side of the steering column. Second, push the high beam light switch up to the “off” position.
Finally, confirm that your headlights are in the “low beam” setting before resuming driving.
How Do I Turn off Automatic High Beams?
Most new cars come with an automatic high beam feature. This is a great safety feature that allows you to see more of the road at night. However, there are times when you may want to turn off the automatic high beams.
Here’s how to do it:
1. Locate the switch for the automatic high beams. This is usually located on the stalk of the steering column near the headlight switch.
2. Flip the switch to the “off” position. This will disable the automatic high beam feature and return your headlights to low beam operation.
3. If you need to use your high beams, simply flip the switch back to the “on” position and they will operate as normal.
How Do You Turn on the High Beams on a Jeep Grand Cherokee?
The high beams on a Jeep Grand Cherokee are turned on by pulling the multifunction lever towards you and then pushing it up.
Where is Auto High-Beam Sensor on Jeep Grand Cherokee?
If you’re looking for the auto high-beam sensor on your Jeep Grand Cherokee, it’s located in the headlight assembly. To access it, you’ll need to remove the headlight housing. Once you have the housing removed, you’ll see the sensor mounted behind the headlight bulb.
Conclusion
If you own a Jeep Grand Cherokee, you may be wondering how to turn off the automatic high beams. Here’s a quick guide on how to do it:
1. Locate the beam control switch on the left side of the steering column.
2. Flip the switch up or down to turn off the high beams.
3. You’ll know the high beams are off when the indicator light on the switch is not illuminated.