Just carrying a simple tool kit with your car or a 4×4 is not enough. There might be situations where we need a tool that is a ‘jack of all trades.’ One such robust, raw, and ubiquitous tool is a Hi-Lift jack. It’s not the ordinary car lifting clamp; you can expect much more from it.
Right from lifting a hefty 4000 lbs SUV to pulling a fast car from mud, hi-lift jack uses are many. If you are new to this raw-looking and massive tool or never used it before, we have got everything covered for you. From going deep into what is a high-lift jack to its advantage and precautions, we are here to help you out with every in and out of it.
The first structure has been around for over a century, with the Bloomfield Manufacturing Company (proprietor of the Hi-Lift Jack Company) first putting it on the business in 1905 as the Automated Combination Tool. Over the next era, the number of applications the jack was able to perform was phenomenal.
In contrast to more specialty items, the high-lift is so adaptable because of its straightforwardness – in fundamental structure, it’s a gigantic mechanical switch.
Utilizing a scope of different connections, tourers can use that power and play out a massive range of employments with the one instrument: fix bowed directing bars; press in uni joints; turn a vehicle around on the spot; it can even serve as a hand winch.
What is a High-Lift Jack?
What exactly is a high-lift jack, and how it’s different from other tools? We will have a look. A High-Lift jack is a robust and multi-purpose tool that you can use to lift the chassis, life-saving when you are stuck in a tree stump or spread out on a rocky surface. This tool is handy to lift off the tire from the ground.
Using a variety of different accessories, a person can utilize a powerful force created by a high lift jack and complete a wide range of jobs with the help of this just one tool.
Right from straightening the bent or curved steering rods to pressing in uni joints and turning a 4×4 around the spot with ease. This tool is a master of all devices, and it has a legacy that it carries with itself.
This is not a tool of today. It’s been present around the community for more than a century ago. It is so versatile that the design is being the same since then. For the off-roaders junkies, this is a must to carry tool.
Many people prefer taking just one device with them that can facilitate most of the jobs, and this tool gets you covered in every situation.
Check Out: Best Low Profile Jack.
How Hi-Lift works?
The working of a high lift jack jeep is pretty simple and straightforward. There are two swinging pins over the Hi-Lift’s runner substitute up the bar’s set of the holes.
Among the two pins, one pin carries the load as the other one is released and relocated to the following hole over when supporting or below when lowering the rig.
The regular aluminum high lift jack is 48 inches long. A 60-inch Hi-Lift option is also available in the market for heightened vehicles and 4×4 SUVs.
The car or your massive SUV is raised by the support of the handle and the power of the operator If you load the jack’s 7,000-lb. Range, a shear pin in the tool, gives way before any vital part of the jack cracks and stops the jack in position rather than quickly falling to the surface.
The bottom of the Hi-Lift fits neat under the box-tube rock sliders. If you’ve round-shaped car sliders and covers, there are accessories offered that latch on to the foot of the tool to catch the round tubing rather than only holding one point of connection.
One of the most well-known mishaps is the point at which the jack errors of the ground it is introduced.
Different Types of High-Lift Jacks
The Hi-Lift Jack company presents a wide range of jacks for numerous uses. There is an option for the tourer freak, off-road enthusiasts, and even for the greatest adventurer who desires to undertake the most difficult of tracks.
Let’s get a closer glance at all of these options so you can pick which one fully suits your needs.
Cast/Steel Hi-Lift Jack
Manufacturers make it from mostly cast hi-lift jack parts, but only 4 of the components are from stamped steel.
This doesn’t reduce the weight limit or other useful features. It means that the stamped steel parts will end up affecting somewhat quicker at a point as compared to the other option.
Cast Made Hi-Lift Jack
If you love to go off-road and encounters use to drag the rig out, or even a farmer uprooting anything up, and you leverage a winch, you might need to step up to the Hi-Lift All-Cast Jack category. It is more robust and sturdy. It’s the best farm jack accessible in the market.
The significant distinction in this design is that the branded parts are exchanged out for pieces that are made up of all cast. This does not raise the load capacity that you will be capable of building.
However, it implies that even if you are resembling utilizing it daily, you don’t have to bother about having to repair this piece for a more extended period.
X-TREME Hi-Lift Jack
Now you’re looking at the complete, robust option; the X-TREME Hi-Lift Jack will facilitate everything you are searching for. This is the best multiple-utility heavy-duty options you can have for your adventure tour.
It’s the jack of all trades, and it will never disappoint you. Any extreme condition is an easy task for this X-TREME Hi-Jack Lift.
One of the most beneficial opinions is the winch-clamp-spreader accessory. This special annex gives you the strength to do any amount of help activities with the jack.
UTV Hi-Lift Jack
If you have enjoyed the benefit of the Hi-Lift Jack for your SUV; But needed to have help while driving a UTV, this is the answer to your requirement. Producers manufactured this variant with identical all casted components as the different jacks. They are available in 42-inch length and a shorter 36-inch option.
How to use a Hi-Lift
The most effective method to Use A Hi-Lift To elevate your SUV, the Hi-Lift must hold the switch in the up position and start with the arms parallelly balanced with the bar.
You can move the foot up the bar to any place you will begin jacking apparently, expecting to turn the instrument.
It might be doable if the jack isn’t beneath load, and the switch is in the upstate.
When the jack is in point, hold the leader of the bar with fingers squeezing just the three sides off from the bar.
Try not to cover the thumb around the bar. This may be challenging the higher you lift the wheels into space, as the volume of energy required raises.
If the jack turns or seems uncertain, don’t force it. Just lower it down and reposition for a more protected pull.
At whatever point you’re going to bring down the wheels, keep the jack with one hand getting a handle on the bar and handle all things considered.
Strike the contrary switch into the descending state, utilizing foot if the switch is tight and tenacious. Keep your one hand over the bar with elbow attached and handle the handle with your other hand to lessen it. After you listen to the climbing pin noise, you can lift the holder.
As the circular holder segments up, the power will develop, and the holder will extend your arm on the bar. The power ascends as the holder rises, so be aware of your foot if the territory is wet.
Benefits of having a Hi-lift Jacks
As there are numerous hi-lift jack uses, people use it to the fullest to make their adventure easier. Let’s check out some of the best benefits of having a Hi-lift jack as it’s the jack of all trades:
● These tools you can easily usually buy as a sophisticated alternative to a bottle jack. Still, a high-lift, you must view as a tool that utilizes vast quantities of directional strength. When observed in that perspective, they match much more of a multi-utility tool rather than just a regular jack.
● If you want to raise a vehicle off the surface to change a tire, a bottle jack is a way more suitable tool. If you need to winch vehicle out of mud, raise a tire out of a swamp hole, jack the whole car up to open a rock, straighten a curved steering rod.
● You can also consider leveraging a high-lift jack as a recovery winch. Due to the simplistic nature of the high-lift, the exact process of doing this is even more straightforward. Like any winching activity, you’ll start by covering a tree trunk spread around an appropriate grapple point.
Accessories for a Hi-Lift
As the tool is universal and multi-purpose, it gets you introduced with a variety of utility tools. Let’s have a sneak-peek into some of the most used ones.
- Neoprene Jack Cover
- Hi-Lift Daystar
- Energy Suspension
Neoprene Jack Cover
To keep the jack’s shifting elements guarded against the components. It’s imperative to have the jack from affixing and the climbing bars from diving into the bar when thou attempt to utilize the jack.
Hi-Lift Daystar
Hi-Lift Jack Handle Isolator moves on and tightly ties the jack handle that corresponds to the “I” beam. In contrast to another item, Daystar’s 1″ thick polyurethane base won’t get harmed after some time or separate from UV hurt. This Isolator one can effectively put on any variation of Hi-Lift Jack.
Energy Suspension
When you are pulling heavy weights or flashing your way within the off roads, you think further about your rig’s motor and wheels than you do about its stopping. Energy suspension gets you covered in this situation to keep you safe.
Maintenance and Tips For Safe Use
Maintenance
A high-lift jack can turn out to be solid to utilize (or even jam) because of the development of earth or mud. Store it out of the climate and consistently give every single moving part a splash with silicone lube before use.
Recovery Points
If your bar work has exceptionally arranged high-lift jacking centers, use them. Jacking off cylinder or plate steel won’t give a strong association, improving the probability of the heap slipping.
Utilize a Base
A strong base gives a stable lifting stage. If there’s any vulnerability, the jack may sink into the ground, use a plate to spread the store.
Use the Right Tool
A high-lift jack is proposed to move overpowering things, not hold them. In case you’re working under your 4×4, ensure it’s stuck with pivot stands, or comparable.
Murphy’s Law
On the off chance that something can turn out badly, it will. Keep anything you needn’t bother with broken or injured out of the ending line of the jack handle, the part, and the vehicle’s way to the ground.
Final thoughts about this excellent tool
Driving rough terrain is a great deal of fun. It is significant, in any case, to ensure you have quite a few devices and apparatus locally available. You can’t call for roadside help with the center of a woods or desert!
On the off chance that large tires, tall suspensions, and nature are your thing, ensure you have a decent high-lift jack in the interest of personal entertainment as well.
It’s ideal for keeping your high-lift jack put away inside for insurance from the components. Keep the handle bolted against the I-pillar, and the turning around the hook in the up position.
To avert authority in the tightening component, and for the smoothest conceivable activity, you’ll need to lube up your jack. You can utilize a light oil or silicon grease on the bar, the pins, the springs, and the sheer jolt.
If your jack doesn’t return messy, you weren’t playing sufficiently hard! Even though they’re rustproof, despite everything, they should be cleared off after each outing.
We hope you found this guide helpful, and it will surely guide in the future while operating or experimenting with the Hi-lift jack.