The 351 Cleveland is a V8 engine with a displacement of 351 cubic inches, made by Ford Motor Company. It was introduced in 1969 as a replacement for the 390 cu in (6.4 L) FE engine. The351 Cleveland was produced until 1974, when it was replaced by the 400 cu in (6.6 L) Windsor engine.
The 351 Cleveland is a V8 engine from Ford with a displacement of just over 351 cubic inches, making it a “small block” by Ford standards. The engine was introduced in 1969 and produced through the end of 1974. It was available in a wide variety of cars and trucks during its production run, including the Mustang, Cougar, Torino, and Bronco.
The351 Cleveland was created as an answer to Chevrolet’s successful small block engines. The goal was to create an engine that would be just as powerful but with better fuel economy. To achieve this, Ford used smaller diameter cylinder heads with larger valves than what were used on the big block engines.
This design gave the 351 Cleveland its distinct look with four oval-shaped exhaust ports on each cylinder head.
Despite its name, the 351 Cleveland is not related to the earlier “Cleveland” small block engine that was produced from 1962-1967. That engine was actually called the “Windsor” after the city in Ontario where it was built.
The confusion arises because both engines were available in Fords sold in North America during their respective production runs.
So if you have a car or truck from the early 1970s with a 351 under the hood, you can be sure you’ve got a true piece of American muscle!
Credit: www.motortrend.com
Which Engine is Better 351C Or 351W?
There are a few things to consider when trying to answer this question. The first is what kind of vehicle the engine will be going into. If it’s a street car, then the 351W might be a better option because it’s easier to find parts for and there are more aftermarket options available.
If it’s a race car, then the 351C could be the better choice because it’s lighter and has potential for more power.
Another thing to consider is what kind of budget you’re working with. A used 351W can be found for fairly cheap, whereas a new or even rebuilt 351C will cost quite a bit more money.
So if you’re on a tight budget, the 351W may be the way to go.
Ultimately, it comes down to personal preference and what your specific needs are for the engine. If you need something that’s powerful and lightweight, then the351C is probably your best bet.
But if you’re looking for something that’s less expensive and easier to find parts for, then the351W might be a better option.
Is a 351 Windsor Considered a Big Block?
The 351 Windsor is a small block V8 engine that was introduced in 1962. It is named after the city of Windsor, Ontario, where it was built. The engine was produced until 1993, when it was replaced by the 5.8L Modular V8.
The 351W is often confused with the big block 429/460 engines because of its physical size and power output potential. However, the Windsor is technically a small block Ford engine. This means that it shares many parts and design features with other small block Fords, such as the 289/302/5.0L engines.
One key difference between the Windsor and other small block Fords is the deck height. The Windsor has a taller deck height than most other small blocks, which allows for a longer stroke length and increased displacement (up to 400ci). This extra displacement can provide significant increases in power, making the 351W a popular choice for performance applications.
While some people consider the351W to be a “big block in disguise”, it is still technically classified as a small block Ford engine.
Is 302 Block the Same As 351 Cleveland?
No, 302 block is not the same as 351 Cleveland. The main difference between the two is that 302 blocks are smaller than 351 Cleveland blocks. This means that 302 engines tend to have less power and torque than their351 Cleveland counterparts.
In addition, 302 blocks also use a different firing order than351 Cleveland blocks.
What Size Engine is a 351 Cleveland?
The 351 Cleveland is a V8 engine with a displacement of 351 cubic inches, or 5.8 liters. This engine was introduced in 1969 and used in a variety of Ford vehicles until the early 1980s. The most common configuration for this engine is eight cylinders with two valves per cylinder, but there were also four-valve-per-cylinder versions produced.
The power output of this engine varies depending on the specific configuration, but it ranges from approximately 250 to 400 horsepower.
Mad Max Interceptor Pull – 351 Cleveland on the Dyno!
Conclusion
The 351 Cleveland is a V8 engine that was produced by Ford from 1970 to 1974. It was designed as a replacement for the Windsor engine, and was used in a variety of vehicles including the Mustang, Torino, and Falcon. The Cleveland was available in two different sizes: the standard 351C and the larger Boss351.
The engine received high marks for its performance and reliability, but was discontinued due to declining sales of the cars it was used in. Today, the 351 Cleveland is considered a classic engine, and is popular among collectors and enthusiasts.