How to install soft top jeep wrangler is a must nowadays. You might be wondering why? Well, Jeep Wrangler has become one of the most useful cars. They usually serve as a family transportation method, and it functions as a 4×4; that means all-terrain vehicles. Something to point out is that depending on any weather condition or any other circumstances; you will need a different Jeep Wrangler. As a result of society’s needs, there are two options in this fantastic and versatile vehicle: the hardtop or the soft top. For you to understand, and maybe you already know, the soft top is similar to a convertible; you will feel your Jeep Wrangler with a different look.
This is your opportunity to follow the following steps and see how fast and easy it is to install the soft top in your amazing Jeep Wrangler.
Check out our product reviews: Best Jeep Soft Top.
What does the soft top mean?
The canvas offers a series of advantages over hard roofs. Less complexity translates into less chance of breakdowns Stroll with your Jeep Wrangler living nature intensely with the soft top. Once installed, it opens and closes with total ease to allow you to enjoy it at any time. Take advantage of the different configuration options according to the needs of each moment.
Therefore, it is essential to understand how to install the soft top Jeep Wrangler in order to do it yourself. This is not a complicated process; you will only need to follow them and make sure that you are doing it in the best way.
How to install the soft top jeep wrangler- Perfectly
After reading this article about how to install the soft-top Jeep Wrangler, you will never let this opportunity pass. You will do it by yourself forever! Do not be afraid of trying; you will notice how easy this process is.
Before you start, you should remove the hardtop to put the soft. That is why you should identify the following before starting to install the soft top
- Right and left frames of the doors
- Six door racks
- Left and right room windows
- Rear window
Step #1: Install and secure the hood position frame
First, what you need to do is installing and secures the hood position frame. This is the metal structure that the top is connected to. The frame locks in position for the pilot, both on the back and the front of the windshield, without the need for any tools. The pilot is located along the sides of the Jeep, on the inside of the vehicle.
Step #2: Grasp the whole top without the windows
Grasp the whole top, with windows on one side, and set it on the top of the frame. The upper part has a plastic shoe on the front; place the pilot on the latch on the front of the windshield.
Step # 3: Taking care, stretch the upper part
Prudently, spread the upper part and put runners in the corners of the plastic back of the Jeep.
Step # 4: Enter into the Jeep and clasps the frame
Enter the Wrangler and fasten the hood to the frame. The clasps are located in the middle and back sections of the frame.
Step #5: Set up the stern windows
Zip the rear traveler windows and put the soft retainers on the railings. Two closures and two fasteners are placed in this window. Likewise, set up the rear window, you will do it with the three zippers and the back part stabilizer bar that slides over the window. Put them, the two back part, of this bar on the metal rails.
Step # 6: Pinup the windows’ angle to the door
Hold the forward-facing windows and put the three metal clasps on the eyelets. It is located on the door. Fasten the corner of the window to the door. The clasp is located at the door near the windscreen. Put the retainer on the rail to secure the window in place. (You should skip the previous step if there are steel doors in the Jeep).
Step #7: Fasten the hood on the clasps
You will need to fasten the veil on the fasteners along the frame. All these will always be located above the traveler windows. It helps to keep the soft top in the right place.
Advice for you to have better experiences!
- Take a ride on the Jeep to ensure that all clasps, zippers, and retainers are firmly in place.
- The installation goes much smoother on a warm day, as the top part is more comfortable to stretch.
- The usage of a wizard makes the setting up process more manageable.
- Pulling too hard with a stuck zipper can cause extreme damage to the zipper pull. Therefore, some light lubrication can help the zipper move more freely.
Remove the soft top Jeep Wrangler
Removing the roof of your Jeep Wrangler can be a lot of fun in warm weather. With the lid off, you can enjoy owning a Jeep, feeling the sensation of being outdoors and letting the wind blow through your hair. Therefore, it is evident that if you previously read how to install the soft-top Jeep Wrangler, now you want to know how to remove it. Do not get stress for it! It is as easy as installing it.
How to remove the soft top Jeep Wrangler
Do not worry about being a beginner, you just need to follow steps, and everything will be in the best way. But, before starting by removing the soft top, locate and remove the two boxes containing the following elements:
- Right and left door frames
- Six door racks
- Left and right room windows
- Rear window
- Two straps for winding the rear windows
- Two rear swing door brackets
Step # 1: Remove the hardtop front panels
Now, as a first step, we are going to remove the two hardboard front panels. Turn the two sun visors down against the windshield and locate the two L-shaped locks in the center of the roof sections. Turn the locks to release them.
Step #2: Disconnect each piece of metal
Open the right and left doors on the Jeep Wrangler. With the help of a friend standing on the other side of the Jeep, unhook each metal clip on the right and left sides of the locking windshield. Pull the top back to the best stops because of the sliding locks on the right and left sides of the frame.
Step # 3: Pull back the sliding locks
Pull back on the plastic sliding locks and lift the metal locking pins at the same time as your friend. Pull the hood back once the locks have been disengaged at the same time as your assistant.
Step # 4: Remove the screws from the bars
Remove the screws on the right and left rear roll bars that secure the softcover to the stabilizer bars with a screwdriver. Pull the soft top out of the Jeep Wrangler.
Have you tried? This process is super easy! You will not have to go to a mechanic to change it or install it. With this list about how to install the soft-top Jeep Wrangler, you will never have any problem with doing it.
Can I install a hood?
You need to know that it is a natural process and that you can do it on your own. It would be very wise if you ask a friend to help you at some point. But, ultimately, you can do it on your own.
Which one lasts longer, the vinyl or canvas hood?
Both materials will last out at the same time range. That means a hood should last a minimum of 5-7 years, all depending on maintenance and care. Remember that it also depends on how much you care about your hood.
What is the inner hood, and what is its function?
The inner hood or inner sky or headliner of a Jeep Wrangler is a cover, either vinyl or fabric. It hides the metal structure from inside the car. It can be installed or replaced if the vehicle takes it from the factory.
How to install the soft top Jeep Wrangler is nowadays one of the most important parts for every Jeep Wrangler driver. Hoods offer acoustic and thermal insulation almost the same as a hardtop. Among the advantages of canvas ceilings, I highlight the small space that a roof of this type needs to be stored when you are going off-roof. It allows keeping the aesthetic more faithful to the original line of the model.
Moreover, by doing it by yourself, you can save money and make sure that you have learned and put them in the best possible way. This is a super easy process that will not give you any problem.